APM Telemetry to

All mods related to the frsky telemetry series of the firmware
Post Reply
DaniSi
Posts: 6
Joined: Sun Aug 03, 2014 9:28 am
Country: -

APM Telemetry to

Post by DaniSi » Mon Aug 11, 2014 5:58 pm

Hello,

i trie to setup the telemetry data from my APM to the 9XR flashed with OpenTX, but it doesnt work. I have read many posts on the forum and try this out but nothing works.

I have now the folowing setup:
APM -> Arduino pro mini (16Mhz, Atmega328p) -> FrSky D8R-II PLUS -> FrSky DJT

- The telemetry mod is setup with this tutorial:
http://forum.turnigy9xr.com/download/fi ... 78c15fa014

- The Arduino is flasht with "jD_IOBoard_FrSkyMAVLink.v03a.hex"

- 9XR is flashed with OpenTX 2.0.8

- In the OpenTX build options i have selected the "Mavlink".

All posts that i have read are for the 9X and the D4R-II or X8R Receiver, but not for actualy my configuration Where could be the problem? Thanks


Danijel

User avatar
Kilrah
Posts: 9451
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: APM Telemetry to

Post by Kilrah » Mon Aug 11, 2014 6:01 pm

DaniSi wrote: - In the OpenTX build options i have selected the "Mavlink".
You shouldn't. The whole point of the ioBoard is to translate mavlink to native FrSky format.

DaniSi
Posts: 6
Joined: Sun Aug 03, 2014 9:28 am
Country: -

Re: APM Telemetry to

Post by DaniSi » Mon Aug 11, 2014 6:03 pm

But which option i muss choose? I have also trie "Frsky" and "Ardupilot", and also no luck.

User avatar
Kilrah
Posts: 9451
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: APM Telemetry to

Post by Kilrah » Mon Aug 11, 2014 6:06 pm

Should work with FrSky.

Can you check you actually get RSSI from the receiver (without the ioboard connected)? If not, there might be a prob with your telemetry mod.

DaniSi
Posts: 6
Joined: Sun Aug 03, 2014 9:28 am
Country: -

Re: APM Telemetry to

Post by DaniSi » Mon Aug 11, 2014 6:22 pm

Now i cant check on that because i dont have it home. But the analog telemetry on A1 and A2 has work before.


DaniSi
Posts: 6
Joined: Sun Aug 03, 2014 9:28 am
Country: -

Re: APM Telemetry to

Post by DaniSi » Wed Aug 13, 2014 5:57 pm

I had one antoher quastion. Is it posible to check with a FTDI if i get data out of the Arduino pro mini?

Post Reply

Return to “FRSky Telemetry Mods”