FrSky FAS-100 Telemetry Amperage Sensor

All mods related to the frsky telemetry series of the firmware
PNaz
Posts: 142
Joined: Tue Dec 27, 2011 5:28 pm
Country: -
Location: Kaleden (Twin Lake), British Columbia

Re: FrSky FAS-100 Telemetry Amperage Sensor

Post by PNaz »

I am using a Taranis with your latest test version of ersky9x, X8R receiver, and the FAS100 into a FVAS-02H high precision vario connected to the SPort. I had the same problem with earlier versions of erSkye. The SP-40A amp sensor straight into the SPort does not have a problem.

Paul

User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: FrSky FAS-100 Telemetry Amperage Sensor

Post by MikeB »

I've managed to hook up the same hardware and create the problem. Then I've sorted the fix as well!
There was some sensor ID mapping for the 'hub' sensors, in hub mode, that wasn't being done for 'hub' sensors in SPort mode.

I need to run some more tests, so I'll post a new test version tomorrow.

Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: FrSky FAS-100 Telemetry Amperage Sensor

Post by MikeB »

Test version with this fix here: viewtopic.php?f=7&t=4676&p=65894#p65894.

Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
PNaz
Posts: 142
Joined: Tue Dec 27, 2011 5:28 pm
Country: -
Location: Kaleden (Twin Lake), British Columbia

Re: FrSky FAS-100 Telemetry Amperage Sensor

Post by PNaz »

A1 is showing the receiver voltage correctly now with the new test version. RxV is showing 0 at all times.

Paul
User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: FrSky FAS-100 Telemetry Amperage Sensor

Post by MikeB »

RxV should be working. Have you set the range for this? It's on the TELEMETRY menu. Go down to the second page where you set RSSI limits and the range for RxV.

Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

Post Reply

Return to “FRSky Telemetry Mods”