d/r rudder using throttle as switch

General Information & Rules
Post Reply
davejomac
Posts: 3
Joined: Sat Dec 10, 2016 6:25 am
Country: -

d/r rudder using throttle as switch

Post by davejomac » Sat Dec 10, 2016 6:41 am

I have just got my e9x. Older jr radios enabled d/r rudder control by throttle. ie high rate rdr at low thr and low rate rdr at high thr.Any help appreciated.Dave

User avatar
MikeB
9x Developer
Posts: 14866
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: d/r rudder using throttle as switch

Post by MikeB » Sat Dec 10, 2016 10:27 am

You need to configure a logical switch, something like:
L1 v>val Thr 0
(Throttle goes from -100% to +100% so greater than 0 is above half throttle).
Now, just use L1 as the switch to enable the d/r setting.

If needed, it is posible to make the d/r amount vary progressively with the throttle setting.

Mike.
ersky9x/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

User avatar
jhsa
Posts: 17116
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: d/r rudder using throttle as switch

Post by jhsa » Sat Dec 10, 2016 11:56 am

That progressive example is in the er9x manual..
Can't post a link at the moment.. :(

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

Daedalus66
Posts: 1665
Joined: Tue Dec 27, 2011 8:22 pm
Country: -
Location: Ottawa

d/r rudder using throttle as switch

Post by Daedalus66 » Sat Dec 10, 2016 1:55 pm


User avatar
jhsa
Posts: 17116
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: d/r rudder using throttle as switch

Post by jhsa » Sat Dec 10, 2016 2:37 pm

Thank you..

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

Post Reply

Return to “General Information & Rules”

Who is online

Users browsing this forum: No registered users and 1 guest