9X Flaps mixed with elevator

General Information & Rules
Post Reply
strilen
Posts: 9
Joined: Sat Dec 15, 2012 8:51 am
Country: Norway

9X Flaps mixed with elevator

Post by strilen » Wed Mar 16, 2016 2:55 pm

Hi.
Turnigy 9X standard firmware.
Aileron + Flap are used to aileron control.
Have maked flaps on an Multiplex Mentor,using both aux channels controled by Hov Pit on channel 7 and 8.
Want elevator mix with flaps to control trim.
Have put it in Mix 1: STATE = ACT
MASTER= AUX
SLAVE = ELE
DNRATE = 10
SW = ID1
It does not work.
Anybody out there to help/ tell me the right way to do it ?

Thanks.

Daedalus66
Posts: 1620
Joined: Tue Dec 27, 2011 8:22 pm
Country: -
Location: Ottawa

9X Flaps mixed with elevator

Post by Daedalus66 » Wed Mar 16, 2016 3:32 pm

Note that this relates to STOCK firmware. Anybody out there still using it who can help him?
This would be easy with Er9x/ErSky9x. My advice would be to install a 9Xtreme or AR9x upgrade board.

Post Reply

Return to “General Information & Rules”

Who is online

Users browsing this forum: No registered users and 1 guest