Page 1 of 1
taranis nano qx hassles
Posted: Thu Aug 14, 2014 10:27 am
by angryrc
taranis with orange module, mode 1,PPM 22.5 @ 300 +, binds properly, nano will fly but aileron and rudder work opposite, ie push stick left ailerons to the right push rudder left nano turns right.I'm very new to rc hope someone can help
Re: taranis nano qx hassles
Posted: Mon Aug 18, 2014 12:12 pm
by WZ9V
angryrc wrote:taranis with orange module, mode 1,PPM 22.5 @ 300 +, binds properly, nano will fly but aileron and rudder work opposite, ie push stick left ailerons to the right push rudder left nano turns right.I'm very new to rc hope someone can help
Re: taranis nano qx hassles
Posted: Mon Aug 18, 2014 12:14 pm
by WZ9V
You need to reverse those channels. In the mixer switch them to negative values.
angryrc wrote:taranis with orange module, mode 1,PPM 22.5 @ 300 +, binds properly, nano will fly but aileron and rudder work opposite, ie push stick left ailerons to the right push rudder left nano turns right.I'm very new to rc hope someone can help
Re: taranis nano qx hassles
Posted: Tue Jan 27, 2015 6:36 am
by liew416
switch the Chanel it will be okey.
Re: taranis nano qx hassles
Posted: Wed Jun 03, 2015 12:32 am
by deaconFlyer
I found that 22.5 @ 400 U.S. was more stable ... AND set all the server throws to +/- 80% (even ch6)
Make sure the polarity is Negative
Channel 2 & 4 are INV
Mix CH6 -> SF Weight (+100%) Switch(!SC¥) NoTrim. .... ¥=down arrow
Good luck!