taranis nano qx hassles

General Information & Rules
Post Reply
angryrc
Posts: 1
Joined: Thu Aug 14, 2014 9:51 am
Country: -

taranis nano qx hassles

Post by angryrc »

taranis with orange module, mode 1,PPM 22.5 @ 300 +, binds properly, nano will fly but aileron and rudder work opposite, ie push stick left ailerons to the right push rudder left nano turns right.I'm very new to rc hope someone can help

WZ9V
Posts: 39
Joined: Thu Jul 10, 2014 8:29 pm
Country: -

Re: taranis nano qx hassles

Post by WZ9V »

angryrc wrote:taranis with orange module, mode 1,PPM 22.5 @ 300 +, binds properly, nano will fly but aileron and rudder work opposite, ie push stick left ailerons to the right push rudder left nano turns right.I'm very new to rc hope someone can help
WZ9V
Posts: 39
Joined: Thu Jul 10, 2014 8:29 pm
Country: -

Re: taranis nano qx hassles

Post by WZ9V »

You need to reverse those channels. In the mixer switch them to negative values.
angryrc wrote:taranis with orange module, mode 1,PPM 22.5 @ 300 +, binds properly, nano will fly but aileron and rudder work opposite, ie push stick left ailerons to the right push rudder left nano turns right.I'm very new to rc hope someone can help
liew416
Posts: 2
Joined: Wed Dec 17, 2014 8:43 am
Country: -

Re: taranis nano qx hassles

Post by liew416 »

switch the Chanel it will be okey.
User avatar
deaconFlyer
Posts: 76
Joined: Fri Apr 05, 2013 11:22 am
Country: Canada
Location: Ontario

Re: taranis nano qx hassles

Post by deaconFlyer »

I found that 22.5 @ 400 U.S. was more stable ... AND set all the server throws to +/- 80% (even ch6)

Make sure the polarity is Negative

Channel 2 & 4 are INV

Mix CH6 -> SF Weight (+100%) Switch(!SC¥) NoTrim. .... ¥=down arrow

Good luck!

Post Reply

Return to “General Information & Rules”