How to use the Transmitter for computer simulation.

Post Reply
Kaneda
Posts: 3
Joined: Thu Oct 22, 2015 9:59 pm
Country: -

How to use the Transmitter for computer simulation.

Post by Kaneda »

I got the 9X with 9Xtreme upgrade board.

Now that the DRL has a free simulator (https://thedroneracingleague.com/simulator/)

My question is:
How to use the TX as a computer controller?

User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: How to use the Transmitter for computer simulation.

Post by jhsa »

As you have the 9xtreme board just turn your radio ON, then plug it to a free USB port on your computer. Wait until the drivers install. Start your simulator and find the radio as a controller for it. Read the simulator's manual to learn how to calibrate the radio.
Don't forget to also create a model for the simulator on the radio itself.

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Kaneda
Posts: 3
Joined: Thu Oct 22, 2015 9:59 pm
Country: -

Re: How to use the Transmitter for computer simulation.

Post by Kaneda »

Ow!

Nice 1, thank you!!!

Post Reply

Return to “9Xtreme upgrade board”