Hi,
when I connect the radio to my pc with Windows 10, in "device manager" I find "STM device in DFU mode" and on the display of the radio nothing appears. If I try to switch on the power of the radio, it appears only "9xtreme". In both cases "companion" software doesn't recognize my radio. What is the problem? Thanks a lot
USB connection problem
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: USB connection problem
Power on holding both horizontal trims held towards the centre. The radio should start in 'bootloader' mode. Then plug the USB cable in.
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: USB connection problem
And you should use "Eepskye" with the 9xtreme radio, not Companion.taag wrote: In both cases "companion" software doesn't recognize my radio. What is the problem? Thanks a lot
The 9xtreme is only supported by Ersky9x and its editor is Eepskye.
OpenTX does not run on that board, so better not use Companion with it.
Go to www.er9x.com to get eepe and eepskye. Just below this post there are 2 links. One of them takes you to some video tutorials. A couple of them are about Eepskye, and how to get it, install it, work with it, etc..
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: USB connection problem
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).