Hello Mikeb,
Regarding your test versions, for he 9Xtreme radio is the version ersky9x9xt_Rom.zip dated 02-Jul-2016 the best to se or the earlier version ersky9xProvR219.zip dated 22-May-2016 the better firmware? I assume all the firmware denoted by ***_music .zip are all appropriate for the 9Xtreme radio.
Regards, Birdman
9Xtreme Radio 6-Position Switch Upgrade Mod
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: 9Xtreme Radio 6-Position Switch Upgrade Mod
Yes, ersky9x9XT_rom.zip , Dated: 02-Jul-2016 12:56 is the one you need to download in Ersky9x Test Versions for the best and newest version.
Open-source firmware's are a Work In Process, as new features are being added from time to time.
Bob B.
Open-source firmware's are a Work In Process, as new features are being added from time to time.
Yes, that's correct !birdman wrote:I assume all the firmware denoted by ***_music .zip are all appropriate for the 9Xtreme radio.
Regards, Birdman
Bob B.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
Re: 9Xtreme Radio 6-Position Switch Upgrade Mod
Even on the latest r219, my Taranis X9E 6 POS switch installed into P3 position shows non-uniform distribution after calibration done.
First click gives about 48% P3 adjustment, second - 17%, third - 9%, fourth - 4%, fifth - 22%. Isn't that possible to adjust this range to uniform steps after the calibration?
First click gives about 48% P3 adjustment, second - 17%, third - 9%, fourth - 4%, fifth - 22%. Isn't that possible to adjust this range to uniform steps after the calibration?
Last edited by Hertz on Thu Nov 24, 2016 11:07 am, edited 1 time in total.
Re: 9Xtreme Radio 6-Position Switch Upgrade Mod
I don't have a taranis, but on my ersky9x radio you calibrate a multi position switch in the hardware menu, not as a pot..
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: 9Xtreme Radio 6-Position Switch Upgrade Mod
Sorry, had a typo in my original post.
I have a Turnigy 9x with 9xtreme board, not a Taranis. The 6pos switch is from a Taranis x9e.
I'm talking about the switch channel value visualisation on the main screen, not about calibrating as a Pot.
Calibration: Different pot positions:
I have a Turnigy 9x with 9xtreme board, not a Taranis. The 6pos switch is from a Taranis x9e.
I'm talking about the switch channel value visualisation on the main screen, not about calibrating as a Pot.
Calibration: Different pot positions:
Re: 9Xtreme Radio 6-Position Switch Upgrade Mod
I'm not sure because I don't have a multi switch installed, but what is important as far as i know is that every position of the multi switch triggers the right switch on the firmware (P0 to P5)??
You are trying to see it still as a pot and it isn't a pot anymore. So, in my opinion (please someone correct me if I'm wrong), what you are seeing on the pot bar in the main screen is irrelevant??
João
You are trying to see it still as a pot and it isn't a pot anymore. So, in my opinion (please someone correct me if I'm wrong), what you are seeing on the pot bar in the main screen is irrelevant??
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: 9Xtreme Radio 6-Position Switch Upgrade Mod
If you use the 6-pos switch as a mix source, you get equally spaced positions (-100, -60, -20, +20, +60, +100) as the outputs. This is the 6-pos as the source, not P3.
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: 9Xtreme Radio 6-Position Switch Upgrade Mod
Thanks, haven't tried using it as a source yet. Still it would be nice if pot visualisation was overridden when the pot is replaced by a 6POS switch.
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: 9Xtreme Radio 6-Position Switch Upgrade Mod
I think I'll be able to do that!
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!