Power output from 9x

[kaznad]

Hi,

Is it possible to power something like a FPV monitor off of the 9x using the barrel connector at the side? I am using the Turnigy 9x with 9xtreme board.

Thanks.

[s_mack]

As is? No. With some wiring cleverness of that connector? Still probably not, but it depends on the current demands of the monitor. I suspect it is far too high.

[kaznad]

As is? No. With some wiring cleverness of that connector? Still probably not, but it depends on the current demands of the monitor. I suspect it is far too high.

Cool, just wanted to know. Thanks for the quick reply. I guess I will just stick a lipo to the back of the monitor.

Thanks again.

[s_mack]

Although, with some care you could wire it such that the raw battery was powering your monitor from that port. It would have nothing really to do with the 9Xtreme. But if the goal is one less battery... you should be able to achieve that.