9xr-pro telemetry

[wesk18]

Hello,

I have a 9xr-pro with ersky9xr220 and with the 4in1 tx module from banggood, how do i enable telemetry? I'm connected to a micro scisky with cleanflight, not sure if the scisky supports it.

thanks in advance

[MikeB]

What receiver are you using?
Have you got the 4-in-1 set up for a serial connection?

Mike.

[wesk18]

Im using dsm2 it's integrated to the micro scisky, yup 4in1 in serial mode.
http://www.banggood.com/Micro-Scisky-32 ... mds=search

[MikeB]

It should work if you are receiving telemetry, however, you need to get some setting correct.
Do you know if the 4-in-1 was built with the "INVERT_TELEMETRY" option?
On the Telemetry menu, set the "Usr Proto" to "DSMx", and make sure the "FrSky Com Port" is set to 1.
If the 4-in-1 has "INVERT_TELEMTRY" then this should work, otherwise, tick "Invert Com1".

Mike.

[wesk18]

Hello,

Telemetry is working after all, found out the board i was using doesn't support telemetry.

thanks