Yes, it is a nice tool to have. Can use it at the field too. Need to build a nice case for it.
By the way, people say that the case banggood sell for it is very weak. That is why I didn't get it. A tool always needs a strong case as it is always falling
João
Upgraded to r218, no sounds/ voice now
Re: Upgraded to r218, no sounds/ voice now
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Upgraded to r218, no sounds/ voice now
hi João, i would like to knwow if you have a wiring diagram for the 9xr pro please? i have made some test with a new lm4861 and i can hear more sound but not as expected and with poor quality. i have the same thing with lm386 and ns4150.
Re: Upgraded to r218, no sounds/ voice now
No, no diagram,
Mine also still has a similar problem. When I modded mine, I got the signal from before the Amp but after the digital volume control. I still get a bit distorted sound, I think there might be something not quite right before the AMP.
It cannot be that I am overloading the new amp's input because I am not getting a very loud sound and the AMP is a 3W one. I reduced the input signal, so the cause of the distortion is definitely not the input signal. As I said, the problem seems to be well before that. I might actually try to bypass the digital volume control as ersky9x can control the volume via software as well..
João
Mine also still has a similar problem. When I modded mine, I got the signal from before the Amp but after the digital volume control. I still get a bit distorted sound, I think there might be something not quite right before the AMP.
It cannot be that I am overloading the new amp's input because I am not getting a very loud sound and the AMP is a 3W one. I reduced the input signal, so the cause of the distortion is definitely not the input signal. As I said, the problem seems to be well before that. I might actually try to bypass the digital volume control as ersky9x can control the volume via software as well..
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Upgraded to r218, no sounds/ voice now
Ok thanks joao
Envoyé de mon GT-I8190 en utilisant Tapatalk
Envoyé de mon GT-I8190 en utilisant Tapatalk