I have another question, I am limited on the number of aux channels being received due to running a high control rate (2Khz on betaflight/cleanflight). So I was thinking that it seems that since most of the switches are only binary, they could easily be combined into one channel using a bitfield. Is this possible currently with latest firmware? If not what do you think about the possibility?
Thanks,
CP
Is it possible to create a bit field so multiple switches can use one channel?
-
- Posts: 25
- Joined: Tue Mar 22, 2016 12:32 am
- Country: -
Re: Is it possible to create a bit field so multiple switches can use one channel?
Something like this, or am I too far South??
viewtopic.php?f=84&t=7299
I think it should be your controller that has to decode what you send on just one channel..
Just like the Attiny on that project I linked does..
João
viewtopic.php?f=84&t=7299
I think it should be your controller that has to decode what you send on just one channel..
Just like the Attiny on that project I linked does..
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Is it possible to create a bit field so multiple switches can use one channel?
That's what "modes" and their respective ranges in the FC firmware are for.