Eepe files

[4ndrew]

I'm trying to transfer models from my th9x with er9x to my new 9xr pro. I dragged and dropped them from one program to the other. Now when I try to load the model it says check mix. And it reboots my 9xr pro. I deleted all mixes and it still crashes. I don't really want to manually transfer all settings one at a time. Any help would be appreciated. Thanks!

[jhsa]

Hi, welcome to the forum..

Something that might help to find the problem.
Which version of the firmware on the pro, and which version of the firmware on the 9x?

João

[4ndrew]

9x is er9x-r767
Vers: v1.5698-mike

9xrpro
Vers v. 110-mike
Svn: ersky9x-r217

Does that help?

[4ndrew]

Also it keeps crashing when setting the protocol. Here is a quick video of the problem. https://youtu.be/jT-QhesQFQc

[jhsa]

9x is er9x-r767
Vers: v1.5698-mike

9xrpro
Vers v. 110-mike
Svn: ersky9x-r217

Does that help?

This is a very old version of the er9x firmware..

Try updating it..

That problem on the 9xr-pro is already known and fixed, I just don't know if it was released though..
Just don't select the assan protocol. Is not doing anything anyway..

João

[4ndrew]

Thanks. So try updating my th9x? I'm trying to use a module that plugs into the headphone plug on the top of the 9xr pro. It's a wl-t6 module. On my th9x I set the protocol to ppmsim.

[idar66]

hi there as mike said update your firmware to lastest, my expierence with the wl toys wl-t6 is that it is a dog to set up, i ended up throwing it away and get the cheap flysky modual which is under $20 its heaps easier to setup, also tx should be set to ppm for wl-6, hope this may help you,