9XR PRO Master and NASA701 Slave using Trainer.

ersky9xr is the port of the er9x firmware to the 9XRPRO radio.
Post Reply
GhostSharp
Posts: 12
Joined: Thu Apr 09, 2015 8:18 am
Country: -

9XR PRO Master and NASA701 Slave using Trainer.

Post by GhostSharp »

Hi,

In configuration of Trainer, only can choose source ch1 to ch4, and the NASA701 can't modify channels configuration and throtle is ch6.

Is there some posibility or firmware for get source more than 4 first channels for trainer configuration?

Thanks

User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: 9XR PRO Master and NASA701 Slave using Trainer.

Post by MikeB »

All the trainer inputs are available to the mixer, they are called PPM1 to PPM16. If, for example, you are transmitting throttle on channel 3, just set up mixes on channel 3 like:
CH3: +100% Thr
R +100% PPM6 Switch(TRN) - note a REPLACE multiplex

Now, when you switch TRN on, the throttle stick will be replaced by channel 6 from the trainer input.

Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
Post Reply

Return to “ersky9xr”