Manuals for 9XR Pro

ersky9xr is the port of the er9x firmware to the 9XRPRO radio.
indept
Posts: 17
Joined: Fri Jul 31, 2015 6:57 am
Country: -

Re: Manuals for 9XR Pro

Post by indept »

Are there any new manuals? the one I have: ER9x_Manual_2015-v01.odt 2015-02-22 has somewhat different menu content than my radio has? I am running R218j firmware.

User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Manuals for 9XR Pro

Post by jhsa »

Er9x manual is the closest one at the moment.. The new ersky9x manual is being written as far as I know..

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
indept
Posts: 17
Joined: Fri Jul 31, 2015 6:57 am
Country: -

Re: Manuals for 9XR Pro

Post by indept »

Ok, Thanks
Daedalus66
Posts: 1844
Joined: Tue Dec 27, 2011 8:22 pm
Country: -
Location: Ottawa

Manuals for 9XR Pro

Post by Daedalus66 »

jhsa wrote:Er9x manual is the closest one at the moment.. The new ersky9x manual is being written as far as I know..

João
It is indeed, but don't hold your breath, as it takes time.

Meanwhile, the 2015 Er9x manual is a pretty good guide to the menus and features.
MeSoLost
Posts: 1
Joined: Tue May 17, 2016 4:10 am
Country: -

Re: Manuals for 9XR Pro

Post by MeSoLost »

My Turnigy 9XR-pro came with ersky9x r212 and everything was ok but when i upgraded to the newest r218 why the heck is my hardware menu completely disabled? I just got this thing specifically to be upgraded. What's the point if you're completely removing the support? So I guess I'm stuck running r212 if I want to do any mods. Is this right? :?:

User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Manuals for 9XR Pro

Post by jhsa »

The hardware menu was hidden to prevent you or someone else from messing up your radio completely. It wasn't removed ;)

To access the hardware menu just turn the radio ON while holding the left horizontal trim to the left for a second or two, and then release it.

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Rally205
Posts: 17
Joined: Tue Jan 17, 2017 4:07 pm
Country: -

Re: Manuals for 9XR Pro

Post by Rally205 »

Hi,

I am not sure if it is me doing something stupid but I think that there is a problem with the ersky9xr explained pdf. I can not print it. It will only print up to page 10. If I try to print it using Acrobat then it will not even start and just says no page was selected. If I use different software as I say it will print up to page 10.
I have tried downloading the file several times in case it was corrupted but still the same. I can read it fine on my pc but I like to print pdf files so that I can quickly flick through and mark items of interest etc. Any ideas?
Thanks
Marcus
Daedalus66
Posts: 1844
Joined: Tue Dec 27, 2011 8:22 pm
Country: -
Location: Ottawa

Re: Manuals for 9XR Pro

Post by Daedalus66 »

It prints fine for me. I think the problem is in your PC.

If you want to PM me with your email, I can send you another version of the PDF.
Paulo
Posts: 1
Joined: Sun Mar 12, 2017 11:19 pm
Country: -

Re: Manuals for 9XR Pro

Post by Paulo »

Hello

I accidentally erase the firmware from my turnigy 9xrpro... help please!
I have tried reinstall it as previous with SAM-BA v2.16 and without any success.
Can anyone please help me?
thanks,
Paulo.
Daedalus66
Posts: 1844
Joined: Tue Dec 27, 2011 8:22 pm
Country: -
Location: Ottawa

Re: Manuals for 9XR Pro

Post by Daedalus66 »

What exactly did you do?

Post Reply

Return to “ersky9xr”