Unable to flash back to er9x for 9XR Pro

ersky9xr is the port of the er9x firmware to the 9XRPRO radio.
Post Reply
vtgrx
Posts: 38
Joined: Sat May 19, 2018 2:43 pm
Country: -

Unable to flash back to er9x for 9XR Pro

Post by vtgrx »

Hey, I recently got a 9XR Pro with OpenTX installed. I wish to flash back to er9x but when I loaded the firmware on SD Card and tried flashing in the bootloader menu by holding down the menu key, I see nothing happens on the screen. I tried flashing back using eepskye but when I run this program, it opens up a box called SPort UART Configure. How do I flash it back?

User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: Unable to flash back to er9x for 9XR Pro

Post by MikeB »

If you start the radio in bootloader mode (power on with both horizontal trims held inwards), what, exactly, appears on the display.
What file did you put on the SD card, and in what directory?

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
Post Reply

Return to “ersky9xr”