For some weird reason starting today, my 9XR-Pro refuses to arm the Pixhawk. This is done by [left stick full down & full left].
Using the Sik telemetry radios and Tower app on my phone it does arm.
I checked that I got -100 showing on the radio screen for the stick movements.
Any other ideas?
Robin
Unable to arm with radio stick (left)
Unable to arm with radio stick (left)
S500 + Pixhawk 1 clone + Mauch PM + C&T Telemetry adapter + 9XR-Pro (Taranis gimbals)/XJT/X8R
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Unable to arm with radio stick (left)
I assume you haven't done a firmware update between it working and not working?
You could try, as an experiment, enabling extended limits and changing the limits so you could get, say, 102%.
Anything changed on the Pixhawk, like channel calibration?
Mike
You could try, as an experiment, enabling extended limits and changing the limits so you could get, say, 102%.
Anything changed on the Pixhawk, like channel calibration?
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Unable to arm with radio stick (left)
No firmware changes, still on R221.
I wonder if the throttle cut switch was on? Will test tomorrow.
I wonder if the throttle cut switch was on? Will test tomorrow.
S500 + Pixhawk 1 clone + Mauch PM + C&T Telemetry adapter + 9XR-Pro (Taranis gimbals)/XJT/X8R
Re: Unable to arm with radio stick (left)
Senior moment! All is good now.
S500 + Pixhawk 1 clone + Mauch PM + C&T Telemetry adapter + 9XR-Pro (Taranis gimbals)/XJT/X8R