Unable to arm with radio stick (left)

ersky9xr is the port of the er9x firmware to the 9XRPRO radio.
Post Reply
rsilk49
Posts: 140
Joined: Wed Oct 26, 2016 10:33 am
Country: United Kingdom

Unable to arm with radio stick (left)

Post by rsilk49 »

For some weird reason starting today, my 9XR-Pro refuses to arm the Pixhawk. This is done by [left stick full down & full left].
Using the Sik telemetry radios and Tower app on my phone it does arm.
I checked that I got -100 showing on the radio screen for the stick movements.
Any other ideas?

Robin
S500 + Pixhawk 1 clone + Mauch PM + C&T Telemetry adapter + 9XR-Pro (Taranis gimbals)/XJT/X8R

User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: Unable to arm with radio stick (left)

Post by MikeB »

I assume you haven't done a firmware update between it working and not working?

You could try, as an experiment, enabling extended limits and changing the limits so you could get, say, 102%.

Anything changed on the Pixhawk, like channel calibration?

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
rsilk49
Posts: 140
Joined: Wed Oct 26, 2016 10:33 am
Country: United Kingdom

Re: Unable to arm with radio stick (left)

Post by rsilk49 »

No firmware changes, still on R221.
I wonder if the throttle cut switch was on? Will test tomorrow.
S500 + Pixhawk 1 clone + Mauch PM + C&T Telemetry adapter + 9XR-Pro (Taranis gimbals)/XJT/X8R
rsilk49
Posts: 140
Joined: Wed Oct 26, 2016 10:33 am
Country: United Kingdom

Re: Unable to arm with radio stick (left)

Post by rsilk49 »

Senior moment! All is good now. :oops:
S500 + Pixhawk 1 clone + Mauch PM + C&T Telemetry adapter + 9XR-Pro (Taranis gimbals)/XJT/X8R

Post Reply

Return to “ersky9xr”