After flashing r221, all telemetry values, including Tx, are zero. I can arm the pixhawk, so I assume I have radio contact.
Switching back to r220, everything is normal . . .
Update: it looks like the Protocol settings in the models are not migrated during the upgrade.
No data showing on radio with R221
No data showing on radio with R221
S500 + Pixhawk 1 clone + Mauch PM + C&T Telemetry adapter + 9XR-Pro (Taranis gimbals)/XJT/X8R
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: No data showing on radio with R221
They are supposed to get migrated automatically when you load a model.
This is handled by the model data having a version number. This is displayed in r221 at the top of the Model Setup|General menu and is 4 for r221.
Did you simply flash the new firmware?
Please, if possible, detail exactly what settings don't appear to be migrated.
Mike
This is handled by the model data having a version number. This is displayed in r221 at the top of the Model Setup|General menu and is 4 for r221.
Did you simply flash the new firmware?
Please, if possible, detail exactly what settings don't appear to be migrated.
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: No data showing on radio with R221
I just did a normal flash via the radio bootloader. All models show v4.MikeB wrote: ↑Sun Mar 04, 2018 3:39 pm They are supposed to get migrated automatically when you load a model.
This is handled by the model data having a version number. This is displayed in r221 at the top of the Model Setup|General menu and is 4 for r221.
Did you simply flash the new firmware?
Please, if possible, detail exactly what settings don't appear to be migrated.
Mike
The External menu value was showing "PPM". I had to manually edit this to XJT on 2 models to get running.
I wonder if this was due to me doing some testing of beta releases a few months back and switching back & forth between firmware versions.
S500 + Pixhawk 1 clone + Mauch PM + C&T Telemetry adapter + 9XR-Pro (Taranis gimbals)/XJT/X8R
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: No data showing on radio with R221
Yes it may well be due to flashing a test version and then reverting. The test version will very likely have changed the model version to 4 before I did the change to the protocol storage.
Mike
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!