please i need help

ersky9xr is the port of the er9x firmware to the 9XRPRO radio.
Post Reply
tosoun
Posts: 14
Joined: Wed Jan 17, 2018 11:32 am
Country: -

please i need help

Post by tosoun »

i put telemetry in my 9xr pro with dht module
i screen show normal is alt. ,volts
i put parameters in menu for voice but the value to play is different with the screen

if some now what make wrong pls help me

User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: please i need help

Post by MikeB »

What values do you have on the screen and what do you then hear?

Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
tosoun
Posts: 14
Joined: Wed Jan 17, 2018 11:32 am
Country: -

Re: please i need help

Post by tosoun »

dear mike thanks for your answer

the value in screen for alt is 0.0. and the sound say 10 meters once after 9 meyers e.t.c
for volts the screen read 12,5 volts and the sound say 6 or 7 to some else.

why read wrong value the voice ???
my version is
sun. ersky9x-r204
ver. v.4- mike
date 11.5.2014
time 08:10:25
mod. revb-x
tosoun
Posts: 14
Joined: Wed Jan 17, 2018 11:32 am
Country: -

Re: please i need help

Post by tosoun »

i have frsky dht module and i connect with cables from frsky rx.tx.to rx.tx input futaba hole
tosoun
Posts: 14
Joined: Wed Jan 17, 2018 11:32 am
Country: -

Re: please i need help

Post by tosoun »

for all different value the voice is wrong
and after up down the vario sensor ,the voice say wrong value

User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: please i need help

Post by jhsa »

You have a very old firmware (nearly 4 years old) installed on your radio. I think you need to update the radio and voice pack.
If someone doesn't do it before, I will post links to the voice pack when I get to my computer.
You can find the latest released firmware at www.er9x.com

João

Sent from my BLN-L21 using Tapatalk

My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
tosoun
Posts: 14
Joined: Wed Jan 17, 2018 11:32 am
Country: -

Re: please i need help

Post by tosoun »

you think for my problem is old version?
i try to put newest version but i don’t now how
if you have some manual how to put new version pls send it me

very thanks for your answer.
User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: please i need help

Post by MikeB »

Manuals are here: http://openrcforums.com/forum/viewtopic ... 122&t=5575.
The one you need is: "9XR Pro Communicating with computer 2016-01-06.pdf".

Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: please i need help

Post by jhsa »

You might also want to look at this video.

https://www.youtube.com/watch?v=SmoGxtO_S7I&t=1s

Update the radio firmware and also the bootloader as shown in the video, and in the manual Mike linked above.
You can download the latest release from the Ersky9x firmware at www.er9x.com
Download "ersky9x for 9XR-PRO"

You can also download the latest TEST version of Ersky9x from:

http://openrcforums.com/forum/viewtopic.php?f=7&t=4676

Test versions have new features that are now being tested. They are quite stable though.. I fly my models using these test versions with no problems. The latest test version available is " ersky9xProvR221g2.zip".

Voice files for newer versions of ersky9x are here. Please note that now Ersky9x uses named voice files instead of numbered files. It is now much easier to identify the files without having a list with the numbers. :)

http://openrcforums.com/forum/viewtopic.php?f=7&t=7715

Download the Ersky9x voice pack, extract it to your radio's SD Card root directory. A "Voice" folder should be created.
MAKE SURE YOU RENAME YOUR OLD "VOICE" FOLDER FIRST.

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
tosoun
Posts: 14
Joined: Wed Jan 17, 2018 11:32 am
Country: -

Re: please i need help

Post by tosoun »

dear many many thanks all work perfect


respect you
thanks again!!!
User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: please i need help

Post by jhsa »

Wonderful :) Good job.. Have fun.. :mrgreen:

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
tosoun
Posts: 14
Joined: Wed Jan 17, 2018 11:32 am
Country: -

Re: please i need help

Post by tosoun »

dear friend pls tell me how in the newest version volume switch with p1 button?
User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: please i need help

Post by jhsa »

Model Setup / general / Volume Control. Select P1

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
tosoun
Posts: 14
Joined: Wed Jan 17, 2018 11:32 am
Country: -

Re: please i need help

Post by tosoun »

sorry and the last i hope question
i want to put but module hc-06 for connection to frsky android app
it’s correct to put in module or in inside radio?
tosoun
Posts: 14
Joined: Wed Jan 17, 2018 11:32 am
Country: -

Re: please i need help

Post by tosoun »

bt module
User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: please i need help

Post by jhsa »

I do recommend the HC-05 BT module, as it can be used as Master or Slave.. The HC-06 can only be used as Slave.

here is how I installed it in my 9XR-PRO. Please see pictures

João
Attachments
20140811_142310.jpg
20140811_142223.jpg
20140811_152425.jpg
20140811_142438.jpg
20140811_142330.jpg
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
tosoun
Posts: 14
Joined: Wed Jan 17, 2018 11:32 am
Country: -

Re: please i need help

Post by tosoun »

the connection module is directly in motherboard 9xr pro?
with 4 pins?rx, tx ,gnd ,volt
tosoun
Posts: 14
Joined: Wed Jan 17, 2018 11:32 am
Country: -

Re: please i need help

Post by tosoun »

same with this schematic?
Attachments
A7739E9D-5AA3-4008-A6CC-81B4D8571A34.jpeg
tosoun
Posts: 14
Joined: Wed Jan 17, 2018 11:32 am
Country: -

Re: please i need help

Post by tosoun »

sorry dear friend but iam new with 9xr pro and i try to find it

it’s possible to fix the quality sound hear?
i put music but the quality is very bad
i converts some song in 16bit 16 khz mono in wav windows format

you know something else to fix loud and quality?

thanks
tosoun
Posts: 14
Joined: Wed Jan 17, 2018 11:32 am
Country: -

Re: please i need help

Post by tosoun »

dear jhsa please answer me for sound quality if have some answer
User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: please i need help

Post by jhsa »

tosoun wrote: Sat Jan 20, 2018 9:54 pm same with this schematic?
Yes, but if you have the HC-05 ( which is recommended) you must also connect to the "Erase" pin.. Check the same diagram but on the bottom left side.

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: please i need help

Post by jhsa »

tosoun wrote: Sun Jan 21, 2018 6:32 am sorry dear friend but iam new with 9xr pro and i try to find it

it’s possible to fix the quality sound hear?
i put music but the quality is very bad
i converts some song in 16bit 16 khz mono in wav windows format

you know something else to fix loud and quality?

thanks
You cannot expect the radio to have an Hi-FI sound. On my radio, I changed the speaker to a better one.

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
tosoun
Posts: 14
Joined: Wed Jan 17, 2018 11:32 am
Country: -

Re: please i need help

Post by tosoun »

dear friend what speaker put for better sound in turnigy 9xr pro?

Post Reply

Return to “ersky9xr”