Since I recently updated everything on the 9XR Pro transmitter and installed ersky9x the voices are very quiet, not tried too many yet but welcome voice and shutting down voice are very quiet, probably missed a setting somewhere but did a search and couldn't find anything easily so hopefully any answers will help the next person trying to find out.
Thx John
How to turn up volume for voices on ersky9x and 9XR Pro
-
- Posts: 97
- Joined: Fri Sep 08, 2017 6:53 pm
- Country: United Kingdom
- Location: Bordon, Hampshire, UK
- Contact:
Re: How to turn up volume for voices on ersky9x and 9XR Pro
Radio Setup / AudioHaptic / Volume, Then select value
and/or
Model Setup / General / Volume Control, Then select source to control the volume.
João
and/or
Model Setup / General / Volume Control, Then select source to control the volume.
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
-
- Posts: 143
- Joined: Sat Dec 02, 2017 10:32 am
- Country: United Kingdom
- Location: Nottingham, UK
- Contact:
Re: How to turn up volume for voices on ersky9x and 9XR Pro
I found my voice pack I made was quite low in volume so I downloaded this program...
https://neon1.net/prog/normalizer.html
And ran it across my wav files and they're now plenty loud enough.
I downloaded it and extracted it into my voice pack home directory where the modelNames, system and user directories are held so in windows explorer I see this.
To run it created a command file with the following inside it.
normalize user\*.wav
normalize system\*.wav
normalize modelNames\*.wav
It's straight forward to do the same. Simply create a text document in that directory with the name norm.cmd (very important to rename it to .cmd). Right click the new file and select edit and this will open the file in notepad. Copy the above three commands into the text document. Save it and you can now double click that file to run the volume normalization program.
https://neon1.net/prog/normalizer.html
And ran it across my wav files and they're now plenty loud enough.
I downloaded it and extracted it into my voice pack home directory where the modelNames, system and user directories are held so in windows explorer I see this.
To run it created a command file with the following inside it.
normalize user\*.wav
normalize system\*.wav
normalize modelNames\*.wav
It's straight forward to do the same. Simply create a text document in that directory with the name norm.cmd (very important to rename it to .cmd). Right click the new file and select edit and this will open the file in notepad. Copy the above three commands into the text document. Save it and you can now double click that file to run the volume normalization program.
Leigh
Current Kit:-
Taranis X9D plus running ErSkyTx - main radio.
Turnigy 9XR-Pro with internal FrSky DHT Module - used on the simulator.
Retired radios:-
Turnigy i10 with FlySky receivers.
Turnigy I6 - My first Tx now just used on Quads.
Current Kit:-
Taranis X9D plus running ErSkyTx - main radio.
Turnigy 9XR-Pro with internal FrSky DHT Module - used on the simulator.
Retired radios:-
Turnigy i10 with FlySky receivers.
Turnigy I6 - My first Tx now just used on Quads.
Re: How to turn up volume for voices on ersky9x and 9XR Pro
Thanks for posting.. will give it a try.
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW