Hi all I am currently using OpenTx and not sure if to move over to ersky9xr.
With OpenTx you have settings screens for Inputs and Outputs but in ersky9xr you do not have these screens, how are these setup?
Is there any other big differences I should know about as it seems harder to get information on OpenTx
Thanks John
Newbie Help with ersky9xr - Inputs and Outputs
-
- Posts: 97
- Joined: Fri Sep 08, 2017 6:53 pm
- Country: United Kingdom
- Location: Bordon, Hampshire, UK
- Contact:
Re: Newbie Help with ersky9xr - Inputs and Outputs
John, in Ersky9x there are no Inputs or outputs menus. You have the Dual Rates menu that you can use to apply Rates or expo to the sticks. And then you have the Mixer, where you assign sticks pots, switches, etc, to the mixes.
What you call outputs is the Limits menu in ersky9x.
In ersky9x there is no need to assign any inputs, just program the mixer using the inputs available there, and adjust dual rates and expo in the Dual Rate / Expo menu. No need to complicate stuff..
OpenTX was forked from ersky9x and moved a different way. One of the great ersky9x enhancements was that it became much more user friendly since then, while maintaining the same power it always had.
João
What you call outputs is the Limits menu in ersky9x.
In ersky9x there is no need to assign any inputs, just program the mixer using the inputs available there, and adjust dual rates and expo in the Dual Rate / Expo menu. No need to complicate stuff..
OpenTX was forked from ersky9x and moved a different way. One of the great ersky9x enhancements was that it became much more user friendly since then, while maintaining the same power it always had.
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
-
- Posts: 97
- Joined: Fri Sep 08, 2017 6:53 pm
- Country: United Kingdom
- Location: Bordon, Hampshire, UK
- Contact:
Re: Newbie Help with ersky9xr - Inputs and Outputs
Ok thanks helped me out no endjhsa wrote:John, in Ersky9x there are no Inputs or outputs menus. You have the Dual Rates menu that you can use to apply Rates or expo to the sticks. And then you have the Mixer, where you assign sticks pots, switches, etc, to the mixes.
What you call outputs is the Limits menu in ersky9x.
In ersky9x there is no need to assign any inputs, just program the mixer using the inputs available there, and adjust dual rates and expo in the Dual Rate / Expo menu. No need to complicate stuff..
OpenTX was forked from ersky9x and moved a different way. One of the great ersky9x enhancements was that it became much more user friendly since then, while maintaining the same power it always had.
João
Sent from my iPhone using Tapatalk