Good evening, I have a problem with updating the firmware on the radio.
If you download "ersky9x for 9XR-PRO" no audio message and the firmware version reports: ersky9x-r220.
If you download "ersky9x for SKY board and AR9X board" the audio is working but still firmware version: ersky9x-r220. It's correct? What do I need to install on my radio?
Firmware upgrade problem 9XR-PRO
-
MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Firmware upgrade problem 9XR-PRO
You want the one for the 9XR-PRO. The file should be ersky9xr_rom.bin. On the version screen, the "MOD" should show "REVB-X".
What revision are you upgrading from? If it is quite old, you may need to also put new voice files on the SD card. At some point I changed from numbered files to named files.
Odd, if on flashing the one for the 'PRO, the audio doesn't work. Is that all audio, or just voice and you hear beeps?
Mike.
What revision are you upgrading from? If it is quite old, you may need to also put new voice files on the SD card. At some point I changed from numbered files to named files.
Odd, if on flashing the one for the 'PRO, the audio doesn't work. Is that all audio, or just voice and you hear beeps?
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Firmware upgrade problem 9XR-PRO
sorry,
The audio works but has changed the volume potentiometer. I've become stupid for that.
The 9xrpro firmware is correct.
With the other firmware review I had RTC not working and consequently telemetry.
Thanks so much
The audio works but has changed the volume potentiometer. I've become stupid for that.
The 9xrpro firmware is correct.
With the other firmware review I had RTC not working and consequently telemetry.
Thanks so much