openrcforums

I do not know if this is happening with my radio If you turn it on and then turn it off, and turn it on again at a quick enter it does not show the viewer But it works normal . When it happens there you have to wait a couple of minutes to turn it on, it works normal display , just having this problem with firmware r220 See my video

Did you revert to a previous firmware and confirm the problem no longer exists?

Mike.

In fact this problem happened ten the first time I updated firmware From the radio For R220 , I'm just reporting this problem now , Now I'm using test version ERSKY9X-PC7R221 The problem still continues , You turn the radio on and off and turn it on fast it will give the problem , Now turn the radio on and off and wait for 2 minutes to turn it on again, it will not give this problem

I have just tried hard to make my 9XR-PRO fail.. I couldn't..

João

Can you revert to any older firmware to check if this is firmware related, or is a hardware problem?

Mike.

I put it 3 firmware only one no gives problem r212 , Look at the 3 videos

I've just released revision r221.
You might check if the display problem still exists with this. Backup your EEPROM bfore flashing this revision in case you need to revert to r212.
If you still have a problem, I'll look into further.

Mike

mike problem solved r221 ,I loved what you added on screen radio volume stayed great Congratulations