ERSKY 9XR Prov 221 d8 - no bind?

ersky9xr is the port of the er9x firmware to the 9XRPRO radio.
Post Reply
dkdwong
Posts: 23
Joined: Mon Jul 06, 2015 12:54 am
Country: -

ERSKY 9XR Prov 221 d8 - no bind?

Post by dkdwong »

I cannot find the bind function in the usual place in protocol. Has it moved to somewhere else or is there a better way to bind in 9XR Pro?

User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: RE: ERSKY 9XR Prov 221 d8 - no bind?

Post by jhsa »

dkdwong wrote:I cannot find the bind function in the usual place in protocol. Has it moved to somewhere else or is there a better way to bind in 9XR Pro?
It would help if you say what protocol.. :)

João

Sent from my thor using Tapatalk

My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
dkdwong
Posts: 23
Joined: Mon Jul 06, 2015 12:54 am
Country: -

Re: ERSKY 9XR Prov 221 d8 - no bind?

Post by dkdwong »

Frsky and DSM protocols.

In the protocol section usually the bind setting is second from the bottom (above the range check).

In D8 the paging in the protocol section seems to be not working. The last line is 1st channel.

The inverted "TRAINER" appears below the inverted "PROTOCOL" heading.
User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: ERSKY 9XR Prov 221 d8 - no bind?

Post by MikeB »

I'm about to post "d9", and I've just checked that the protocol menu is working correctly (with bind) on the 9XR-PRO.
The "inverted" TRAINER entry takes you to a trainer setup menu if you press MENU while it is highlighted.

Mike.

Edit: "d9" posted.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: ERSKY 9XR Prov 221 d8 - no bind?

Post by jhsa »

Mike, as I suggested before, perhaps it would help if dedicated sub menus (the same as the trainer) were implemented for the internal and external module in the protocol menu. The idea is to separate the settings from one and the other, and avoid changing the settings on the wrong protocol. It already happened to me several times. It would also keep things organized. But I still didn't see d9, so probably you've already done it :) will install it in a while.

Thanks

João

Sent from my thor using Tapatalk



My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

dkdwong
Posts: 23
Joined: Mon Jul 06, 2015 12:54 am
Country: -

Re: ERSKY 9XR Prov 221 d8 - no bind?

Post by dkdwong »

OK - my mistake.

The changes in he internal / external and the protocols fooled me. I finally found the BIND functtion.

Thanks for explaining the inverse TRAINER sub-menu.

I had to re-bind all my models after installing d8.

Thanks for the continuing development.

Post Reply

Return to “ersky9xr”