Turnigy 9XR pro with Assan X8j not 9 channels

[jeda007]

Hi!
Me and my friend is Little confused about configure Turnigy 9XR pro With Assan X8J transmitter and Assan X8R9 receiver!

The problem is that the receiver is 9 channel but whe can only make 8 to work??

The firmware on Turnigy 9XR pro is ERSKY9X r2.18, a strange thing is when whe use assan protocoll nothing happens?
But when whe use protocoll ppm8 channel 8 (ppm drive- full drive pollarity pos) 8channel works, whe have tried to use ppm9 but no change.

Is there anyone that made 9 channel work on turnigy 9XR pro??

Would be greatfull for help!

Best regards Jens

[jhsa]

If your module really supports 9 channels, it should work. Change the protocol menu to send 10 channels or so.
many modules/radios say that they are 9 channels, but they're actually only 8

João

[jeda007]

Hello!
Thanks for your Quick reply! loked everywhere for information about Assan X8J transmitter, i could not find anything about output channels:-P
It is most likely as you said that it only sends 8 channels!

I have to make it Another way!

Thansk again!

[MikeB]

The ASSAN protocol was for a Tx module from Assan that supported DSM. After a few months of development, Assan stopped responding to me and the development stopped. I have removed the ASSAN option from the latest releases of ersky9x as a result.

Mike.

[jeda007]

Hi!

That was sad, making much work to no use

But i am glad of your work and effort!