date/time

[Parts]

Hello
I am running ersky-pr219. Cant set time or date and am unable to get to hardware settings Can someone help

[MikeB]

To get to the hardware settings power on holding the left trim switch to the left (should be described in the HELP on the main popup).

Can you adjust the time values on the Date-Time menu? Once set you press MENU LONG to set the actual RTC.

Mike.

[Parts]

I upgraded my gimbals to Taranis so I need to hold the left trim to the right to get into hardwear. The gimbal had to go in upside down.
I can adjust all the time/date values but after pressing menu long they will not hold

[jhsa]

You will have to check the RTC battery inside the radio.. probably replace it..

If you have to hold the trim to the right to enable the hardware menu, you have something wrong.. The gimbals are independent from the trims. Installing the gimbal upside down should not affect the direction of the trim.

Did you change the wiring on the trim switches??

João

[Parts]

I will check and replace the battery. Don't think I changed the wiring but Ill check
Thanks