Unable to set Date/Time
Unable to set Date/Time
Just updated firmware from r212 to r217 and now I'm unable to set date/time. When I change the values of the date/time then scroll down past the year the courser disappears and when I press MENU LONG nothing happens. Is this a bug n the firmware of r217?
- MikeB
- 9x Developer
- Posts: 17990
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Unable to set Date/Time
Hmmm, it might be. Try ersky9xr_rom.bin from ersky9xProvR218h.zip found here: viewtopic.php?f=7&t=4676#p65894.
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Unable to set Date/Time
Sorry Mike, out of the five choices after I unzip it. Is it the file erskyxr_rom that has the firmware for the 9xr pro? Hope that's not a dume question.
- KAL
- Posts: 552
- Joined: Thu Oct 10, 2013 4:36 pm
- Country: Germany
- Location: somewhere near Rothenburg ob der Tauber
Re: Unable to set Date/Time
"ersky9xr_rom.bin" is the right choice for the PRO.
And there are no dumb questions. There can only be dumb answers.
Klaus
And there are no dumb questions. There can only be dumb answers.
Klaus
( TH9X / 9XTreme / FrSky DHT / Spektrum / Multi / RotEnc )
( 9XR PRO / erSKY9x / FrSky DHT / Spektrum / Multi / RotEnc / P3 as Slider )
( 9XR PRO / erSKY9x / FrSky DHT / Spektrum / Multi / RotEnc / P3 as Slider )
Re: Unable to set Date/Time
After updating to to r218 I can now change the date/time. Actually it showed that it was already set to the correct date/time after the restart. So that makes me believe it was already set in r217 but just did not display it. The problem I have now though is the welcome message is no longer sounding and the hardware menu shows disabled. I did read somewhere were it can be enabled at start up. Just can't remember what the startup sequence was.
- MikeB
- 9x Developer
- Posts: 17990
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Unable to set Date/Time
Hold the left horizontal trim to the left as you power on to enable the hardware menu.
Copy any 'numbered' .wav files from /voice to /voice/system on the SD card.
Mike.
Copy any 'numbered' .wav files from /voice to /voice/system on the SD card.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Unable to set Date/Time
Thanks Mike will try that.
Again thanks for your help.
Again thanks for your help.
Re: Unable to set Date/Time
Mike the voice file for the welcome screen seems to work except the Pro will not play it. I'm assuming the file number is 0028. Where on the radio menu would I find the input data for that sound file?MikeB wrote:Hold the left horizontal trim to the left as you power on to enable the hardware menu.
Copy any 'numbered' .wav files from /voice to /voice/system on the SD card.
Mike.
Dieter
Re: Unable to set Date/Time
Download the voice pack from here and install it.
Backup your current voice pack to the PC, and then unzip the downloaded file to the root directory of your SD Card.
viewtopic.php?f=7&t=7715
João
Backup your current voice pack to the PC, and then unzip the downloaded file to the root directory of your SD Card.
viewtopic.php?f=7&t=7715
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Unable to set Date/Time
Will that really need to be done just to get the Welcome message since all other files seem to be working?
Dieter
Dieter
Re: Unable to set Date/Time
They seem to be, or are they?
Anyway if you don't want to do that then try renaming the file number 0028.wav to "Welcome.wav" (I think) and copy it to the "system" folder inside the voice folder.
João
Anyway if you don't want to do that then try renaming the file number 0028.wav to "Welcome.wav" (I think) and copy it to the "system" folder inside the voice folder.
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Unable to set Date/Time
Thanks jhsa
I had a closer look at the new voice pack that I had already downloaded the other day. After looking at it I noticed there were a lot of new voice files there. I did copy it to the root per your suggestion and the welcome message now works.
Thanks again for you help.
Regards
dieter
I had a closer look at the new voice pack that I had already downloaded the other day. After looking at it I noticed there were a lot of new voice files there. I did copy it to the root per your suggestion and the welcome message now works.
Thanks again for you help.
Regards
dieter
Re: Unable to set Date/Time
No problem.. Happy to help
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Unable to set Date/Time
Had same problem newest rom fixed it. Also seems like hardware monitor is working (temp)[emoji14]didn't even know that was a feature thanks again guys !!
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
-
- Posts: 1
- Joined: Thu Nov 10, 2016 8:52 pm
- Country: -
Re: Unable to set Date/Time
MIKE ,I know this is an old thread but i need help.......my 9xr pro tx is blank and i need old firmware b/c this is the only version that has worked w switch upgrades ver. r212 factory
- MikeB
- 9x Developer
- Posts: 17990
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Unable to set Date/Time
I think this is the file you want.
Does the 'PRO start in bootloader mode (both horizontal trims inwards at power on)?
Mike.
Does the 'PRO start in bootloader mode (both horizontal trims inwards at power on)?
Mike.
- Attachments
-
- ersky9xr_rom212.zip
- (107.79 KiB) Downloaded 209 times
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!