9XR Pro and Simulators

[iFeghali]

hello there,

will this works with 9XR Pro and RealFlight/other simulator:

https://hobbyking.com/en_us/frsky-proto ... atior.html

?

If not, can someone please point me to the correct cable (i'm in trouble finding one) ?
Please note that I'm running a MacBook.

Thanks.

[jhsa]

If you update to the latest firmware, all you should need is a USB cable.
Turn the radio ON and then connect the cable. The radio will now be recognized as an HID Joystick.. Not sure this works with a MacBook though

João

[Kilrah]

Realflight will probably need the cable it comes with connected to the trainer port since that serves as copy protection (unless it changed).

So it depends on the simulator you use really.

[rsilk49]

Forget cables, Go wireless!

https://www.rcgroups.com/forums/showthr ... wirelessly

[jhsa]

I went wireless by building this project..

http://openrcforums.com/forum/viewtopic.php?f=84&t=9625

João

[iFeghali]

that's the only simulator I found for the mac:

https://www.ikarus.net/en/

[iFeghali]

Ok, thanks again João I didn’t had to buy new accessories

USB cable plugged in, radio calibrated, Aerofly RC7 bought from the Mac App Store. Only the sticks are working though, no buttons or pots. But that’s already a very good start.




Enviado do meu iPhone usando Tapatalk