openrcforums

Hi all
Had this problem previously and solved it, however I'm on a competition w/e and my notes are in the house(message there somewhere!)
How is it done, which menu and where?
The rockers I refer to are under and at the sides of the gimbals.

Those are the trims, I suppose?
What firmware are you using on your radio?
Ersky9x or OpenTX?

João

yeap(couldn't think of the proper name), Ersky9x r220

First check in the "DiagSwtch" menu the trim switches are responding, then check your mixes to see you have "Include Trim" set.
Test for trim movement in FLight Mode 0.

Mike

Ok, got 3 trimmers working the lhs horizontal isn't, however in dia swi the trimmer indicates a 0 -> 1 when manipulated - where to now?

Check the mixes as Mike suggested.

João

haven't got any mixes - however cracked it, by clearing the mix setups and reconfiguring - a bit of a ball acher but it workrd, my chum jean pierre (his tx) sends a thank you for your time and effort, We can now get practising for tomorrows completion(model boat steering etc)
And a big thanks from me as well!

“Haven’t got any mixes.”
With ER9X, etc., you’ve always got mixes. They are what’s found on the Mixer page. Without mixes, nothing happens.
You’re thinking about traditional radios, where “mixes” are something optional that you use to do things like couple the rudder to aileron action.