9xr pro with Irangex 4 in 1

Hardware Support for the 9XR Pro
Post Reply
davids
Posts: 16
Joined: Wed Jun 21, 2017 11:05 am
Country: -

9xr pro with Irangex 4 in 1

Post by davids »

Weli I have just recived a new module from banggood (replacment), in this module the green led are illuminated as power is on.
If i choose diffrent protocol then multi one of the led blinks. So it seems that the module is allive. In spite of that I was not able to bind the module with my orange reciver. my setup is:
turnigy 9xr pro with frimware of Ersky9xr version-220
With in the model setup in the protocol:disable the internal module
selected external module
setup proto to Multi
setup protocol to DSMsetup Type to DSMX-11 allso tried DSM2-11, DSM2-22 and Auto
Setup Autobind to N.
Option: 9Ch
In addition in the telemetry setup:
Usr Proto: DSMx.
Invert com 1
Yet I am unable to bind with my OrangeRx 920x v2 DSM2/DSMX reciver.

davids
Posts: 16
Joined: Wed Jun 21, 2017 11:05 am
Country: -

Re: 9xr pro with Irangex 4 in 1

Post by davids »

Haleluia Changing the sub porotocol to DSMx-22 solve the problem!!!!
User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: 9xr pro with Irangex 4 in 1

Post by MikeB »

You may wish to update the ersky9x firmware to a recent "test" version. Providing the firmware in the module is up to date, then you would get status returned from the module. This allows you to use "AUTO" when binding when the required settings are automatically configured from the response of the receiver.

Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
User avatar
Wimh
Posts: 82
Joined: Wed Dec 28, 2011 1:41 pm
Country: Belgium
Location: Vliermaal, Belgium
Contact:

Re: 9xr pro with Irangex 4 in 1

Post by Wimh »

What to use for frsky d8 type receiver?Tried frsky subtype none and 3 , not working
Wim
Belgium
User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: 9xr pro with Irangex 4 in 1

Post by MikeB »

"FrskyD", the third protocol in the list should work, subType 0.

Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

User avatar
Wimh
Posts: 82
Joined: Wed Dec 28, 2011 1:41 pm
Country: Belgium
Location: Vliermaal, Belgium
Contact:

Re: 9xr pro with Irangex 4 in 1

Post by Wimh »

MikeB wrote: Sat Jul 22, 2017 10:00 am "FrskyD", the third protocol in the list should work, subType 0.

Mike.
I only have type none and one to seven?
Wim
Belgium
User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: 9xr pro with Irangex 4 in 1

Post by MikeB »

"None" is subType 0.

Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
User avatar
Wimh
Posts: 82
Joined: Wed Dec 28, 2011 1:41 pm
Country: Belgium
Location: Vliermaal, Belgium
Contact:

Re: 9xr pro with Irangex 4 in 1

Post by Wimh »

Does not work, tried Assan, does not work either.
How to check if module gets any power at all?
Edit: Easy, open it and discover 2 led...
Nothing was making contact. I had to unscrew the print and seat it properly on the contacts.Led now lighting, gave me confidence.Tried Assan first, then FrSky.Both now bound without problems...😊
Wim
Belgium
davids
Posts: 16
Joined: Wed Jun 21, 2017 11:05 am
Country: -

Re: 9xr pro with Irangex 4 in 1

Post by davids »

MikeB wrote:You may wish to update the ersky9x firmware to a recent "test" version. Providing the firmware in the module is up to date, then you would get status returned from the module. This allows you to use "AUTO" when binding when the required settings are automatically configured from the response of the receiver.

Mike.
Thanks Mike I will try to do it in the weekend

Post Reply

Return to “Turnigy 9XR PRO radio”