How to connect FRSKY voltage sensor to X8R RX and Turnigy 9XR Pro
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: How to connect FRSKY voltage sensor to X8R RX and Turnigy 9XR Pro
Can you confirm that you have bind between your XJT module and X8R receiver ?
Bob B.
Bob B.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
Re: How to connect FRSKY voltage sensor to X8R RX and Turnigy 9XR Pro
Receiver led is solid green.bob195558 wrote:Can you confirm that you have bind between your XJT module and X8R receiver ?
Bob B.
I noticed there is a selection for "receiver number". Would this have anything to do with it?
Sent from my iPhone using Tapatalk
Re: How to connect FRSKY voltage sensor to X8R RX and Turnigy 9XR Pro
There is also a menu item called "logging" Everything seems to be checked in this list. Should they all be checked?Stephanb wrote:Receiver led is solid green.bob195558 wrote:Can you confirm that you have bind between your XJT module and X8R receiver ?
Bob B.
I noticed there is a selection for "receiver number". Would this have anything to do with it?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: How to connect FRSKY voltage sensor to X8R RX and Turnigy 9XR Pro
Solid green is what the X8R should be when it is connected with its XJT module.
There are different ways to make the Bind and Mode 2 and Mode 3 are without Telemetry working.
Are you making the Bind using Mode 5 (D16) process ?
I have not used the logging, but I believe it dose not affect the Telemetry.
Bob B.
There are different ways to make the Bind and Mode 2 and Mode 3 are without Telemetry working.
Are you making the Bind using Mode 5 (D16) process ?
I have not used the logging, but I believe it dose not affect the Telemetry.
Bob B.
Last edited by bob195558 on Thu May 11, 2017 7:31 pm, edited 2 times in total.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
Re: How to connect FRSKY voltage sensor to X8R RX and Turnigy 9XR Pro
Yes X8R is bound correctly, no jumper, solid green, mode 5
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: How to connect FRSKY voltage sensor to X8R RX and Turnigy 9XR Pro
I am not sure where the trouble is, maybe Mike B. will have an idea.
To review, you had some of telemetry working (RSSI), but after flashing to the newest erSky9x firmware (9XR-Pro),
now there is no telemetry at all.
You should be seeing the RSSI and your photo is showing nothing now (viewtopic.php?f=122&t=10152#p128227).
Could try this, With radio off remove the XJT module and plug it back in.
A wild thought that maybe pin 5 (bottom) is not making connection with the XJT.
When I have had trouble in the past (2013) with S.Port telemetry failing not to work,
this what I did: when making bind I had to have the S.Port sensors connected
to the X8R receiver. When I made bind not having S.Port sensors connected,
I then did not get S.Port telemetry working.
Maybe Mike or João will see this and have better ideas to where your problem is.
Bob B.
To review, you had some of telemetry working (RSSI), but after flashing to the newest erSky9x firmware (9XR-Pro),
now there is no telemetry at all.
You should be seeing the RSSI and your photo is showing nothing now (viewtopic.php?f=122&t=10152#p128227).
Could try this, With radio off remove the XJT module and plug it back in.
A wild thought that maybe pin 5 (bottom) is not making connection with the XJT.
When I have had trouble in the past (2013) with S.Port telemetry failing not to work,
this what I did: when making bind I had to have the S.Port sensors connected
to the X8R receiver. When I made bind not having S.Port sensors connected,
I then did not get S.Port telemetry working.
Maybe Mike or João will see this and have better ideas to where your problem is.
Bob B.
Last edited by bob195558 on Thu May 11, 2017 1:16 pm, edited 1 time in total.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
Re: How to connect FRSKY voltage sensor to X8R RX and Turnigy 9XR Pro
It could be that the pins on the 9XR-PRO are too short. It wouldn't be the first..
Another question, if you set the date and time in "Radio Setup / Date-Time", do the settings remain correct after you reboot the radio?
João
Another question, if you set the date and time in "Radio Setup / Date-Time", do the settings remain correct after you reboot the radio?
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: How to connect FRSKY voltage sensor to X8R RX and Turnigy 9XR Pro
I will check this out and get back to you later today. Thanks
Re: How to connect FRSKY voltage sensor to X8R RX and Turnigy 9XR Pro
No. After setting the time and pushing "menu long", the time settings revert back to zero or default.jhsa wrote:It could be that the pins on the 9XR-PRO are too short. It wouldn't be the first..
Another question, if you set the date and time in "Radio Setup / Date-Time", do the settings remain correct after you reboot the radio?
João
Sent from my iPhone using Tapatalk
Re: How to connect FRSKY voltage sensor to X8R RX and Turnigy 9XR Pro
Ok, open the radio. Remove the back, and lay the radio with the sticks facing down and the top of the radio away from you. On the right side you will see a button battery mounted vertically. Replace it. Now try to set the time and date, check the invert COM1 option in telemetry, and check if the telemetry now works..
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: How to connect FRSKY voltage sensor to X8R RX and Turnigy 9XR Pro
Replaced battery, and tried to set time and date. The time and date settings would not hold. I tried using the "exit" button to see if that would set the time but no go. Tried using the "menu long" method and no luck.
-Successfully rebound receiver several times and confirmed by solid green on receiver, and THR up started the timer consistently.
-Successfully rebound receiver several times and confirmed by solid green on receiver, and THR up started the timer consistently.
Re: How to connect FRSKY voltage sensor to X8R RX and Turnigy 9XR Pro
Make sure you installed the RTC battery the right way round..
João
Sent from my thor using Tapatalk
João
Sent from my thor using Tapatalk
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
How to connect FRSKY voltage sensor to X8R RX and Turnigy 9XR Pro
Yes, it's labeled. Tried both ways just in case.jhsa wrote:Make sure you installed the RTC battery the right way round..
João
Sent from my thor using Tapatalk
Positive is facing toward the inside of the tx.
Sent from my iPhone using Tapatalk
Re: How to connect FRSKY voltage sensor to X8R RX and Turnigy 9XR Pro
make sure that the RTC battery is actually charged then.. Sometimes they are already flat when we buy them..
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: How to connect FRSKY voltage sensor to X8R RX and Turnigy 9XR Pro
Man. this is very frustrating.
I decided to try to download the firmware again to get a fresh start. I have the eepesky program loaded. Where do I get the actual firmware?
I decided to try to download the firmware again to get a fresh start. I have the eepesky program loaded. Where do I get the actual firmware?
Re: How to connect FRSKY voltage sensor to X8R RX and Turnigy 9XR Pro
Www.er9x.com for the Latest release..
I'm not at home at the moment, but I'm sure someone will also post a link to the test versions before I get home.
João
Sent from my thor using Tapatalk
I'm not at home at the moment, but I'm sure someone will also post a link to the test versions before I get home.
João
Sent from my thor using Tapatalk
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: How to connect FRSKY voltage sensor to X8R RX and Turnigy 9XR Pro
ok the firmware is updated again. I there anyway to "copy" the precise settings from your screen? Time and date still do not function. Is my "new and unused" radio defective?
Re: How to connect FRSKY voltage sensor to X8R RX and Turnigy 9XR Pro
Did you actually measure the voltage of the RTC hattery?
Sent from my thor using Tapatalk
Sent from my thor using Tapatalk
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: How to connect FRSKY voltage sensor to X8R RX and Turnigy 9XR Pro
No. I will and let you know
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Re: How to connect FRSKY voltage sensor to X8R RX and Turnigy 9XR Pro
Sorry for the delay. I measured the voltage at 3.04 V so I think the battery is OK. Still time and date will not hold.jhsa wrote:Did you actually measure the voltage of the RTC hattery?
Sent from my thor using Tapatalk
Sent from my iPhone using Tapatalk
Re: How to connect FRSKY voltage sensor to X8R RX and Turnigy 9XR Pro
Are you sure the battery is inserted correctly?
Joåo
Sent from my thor using Tapatalk
Joåo
Sent from my thor using Tapatalk
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: How to connect FRSKY voltage sensor to X8R RX and Turnigy 9XR Pro
Yes. Positive is facing inside the radio, or left as you face it.
Re: How to connect FRSKY voltage sensor to X8R RX and Turnigy 9XR Pro
Positive is the outside of the battery.. I believe the negative connects to the contact inside the battery holder
João
Sent from my thor using Tapatalk
João
Sent from my thor using Tapatalk
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: How to connect FRSKY voltage sensor to X8R RX and Turnigy 9XR Pro
Yes. That is how I have it. Should I reset, re-flash the transmitter to see what happens? Would clearing all my settings maybe help, in case I input the wrong parameters?