Binding TX to RX
Posted: Sat Mar 16, 2013 7:13 pm
Hello guys,
I'm quite new to this whole open source stuff and I have no idea of almost everything. But I hope someone will help me anyway. Although I have read a lot, I am much more confused than at the beginning. Therefore I didn't really know in which section I should create this thread. sry moderators!
OK let's come straight to the point. The facts are quite simple:
- I have bought a Bixler 2
- a Turnigy 9XR with OrangeRx Open LRS 433MHz TX Module http://hobbyking.com/hobbyking/store/__ ... ible_.html
- and a OrangeRx Open LRS 433MHz 9Ch Receiver http://hobbyking.com/hobbyking/store/__ ... eiver.html
Everyone said that you do not use the standard firmware, so I've also bought a programming device. http://hobbyking.com/hobbyking/store/__ ... ssors.html
So now Im confused What exactly does that mean? Firmware for what? For the receiver and the module ? Or for the receiver and the Turnigy 9xr? Or for all three?
I know this is embarrassing to ask but what do I do?
What do I have to consider about the firmware choise and how does the binding process work? There are things like "openLRSng", "undeadmod4.0", "open9x", "ER9X" But I don't know what goes where and what is compatible with what.
-I already innstalled my USBasp
-I successfully installed open9x on my Turnigy 9XR
-And I successfully installed openLRSng 1.6 on my RX
Does it work together? If yes, how do I bind it? If no, what should I do
I'm quite new to this whole open source stuff and I have no idea of almost everything. But I hope someone will help me anyway. Although I have read a lot, I am much more confused than at the beginning. Therefore I didn't really know in which section I should create this thread. sry moderators!
OK let's come straight to the point. The facts are quite simple:
- I have bought a Bixler 2
- a Turnigy 9XR with OrangeRx Open LRS 433MHz TX Module http://hobbyking.com/hobbyking/store/__ ... ible_.html
- and a OrangeRx Open LRS 433MHz 9Ch Receiver http://hobbyking.com/hobbyking/store/__ ... eiver.html
Everyone said that you do not use the standard firmware, so I've also bought a programming device. http://hobbyking.com/hobbyking/store/__ ... ssors.html
So now Im confused What exactly does that mean? Firmware for what? For the receiver and the module ? Or for the receiver and the Turnigy 9xr? Or for all three?
I know this is embarrassing to ask but what do I do?
What do I have to consider about the firmware choise and how does the binding process work? There are things like "openLRSng", "undeadmod4.0", "open9x", "ER9X" But I don't know what goes where and what is compatible with what.
-I already innstalled my USBasp
-I successfully installed open9x on my Turnigy 9XR
-And I successfully installed openLRSng 1.6 on my RX
Does it work together? If yes, how do I bind it? If no, what should I do