I2C servo controller

Support and help for the OpenLRSng project.

Moderator: kha

Post Reply
ScottyWarpNine
Posts: 1
Joined: Tue Apr 25, 2017 6:39 pm
Country: -

I2C servo controller

Post by ScottyWarpNine » Tue Apr 25, 2017 6:43 pm

Hi, I got OpenLRSng working on the tinyduino platform and I would like to use their I2C servo controller instead of PWM outputs or PPM. I'm looking through the code looking for a part where control data is outputted to the outputs for PWM data so that I can tap into that information and send it via I2C to the servo controller, but I'm having trouble finding it. I've looked pretty extensively through the RX header file but maybe I'm just missing it.

Any help would be appreciated!

tsenecal
Posts: 23
Joined: Wed Mar 22, 2017 8:32 pm
Country: United States

Re: I2C servo controller

Post by tsenecal » Tue May 09, 2017 7:09 pm

could you post a link to this "tinyduino i2c servo controller"? i found the site for tinyduino, but nowhere that i can find does it list/describe an i2c servo controller...

i am familiar with this i2c based servo controller:
https://www.adafruit.com/product/815
and have written a sketch that controls that using an input pin that is basically a modified PWM stream...

but not know what i2c servo controller you are specifically using, i cannot help

Post Reply

Return to “OpenLRSng”

Who is online

Users browsing this forum: No registered users and 8 guests