T9X OpenTx buttons problem - flashing via USBAP

Post Reply
JiriBenes
Posts: 5
Joined: Fri May 29, 2015 7:57 am
Country: -

T9X OpenTx buttons problem - flashing via USBAP

Post by JiriBenes » Fri May 29, 2015 8:15 am

Hello,

I have a problem with my radio Turnigy 9x. I flashed it on OpenTx firmware and since then the radio is behaving strangely.
More on the video: https://www.youtube.com/watch?v=HFqtms8ndgA and https://youtu.be/HXsGQ1VaM2M

I used the the latest Companion software with the argument -B 100.
Before that on Turnigy firmware buttons acted normally. Sometimes the radio operates normally (about 1 minute - with OpenTx), and then starts to do weird things like on video.

Any ideas?

Sorry to use Google Trasnlate.

User avatar
jhsa
Posts: 17724
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: T9X OpenTx buttons problem - flashing via USBAP

Post by jhsa » Fri May 29, 2015 8:51 am

What does it say on the screen when it turns ON?
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

JiriBenes
Posts: 5
Joined: Fri May 29, 2015 7:57 am
Country: -

Re: T9X OpenTx buttons problem - flashing via USBAP

Post by JiriBenes » Fri May 29, 2015 11:50 am

Here are the videos:
[BBvideo 425,350]https://www.youtube.com/watch?v=HFqtms8ndgA[/BBvideo]
[BBvideo 425,350]https://www.youtube.com/watch?v=HXsGQ1VaM2M[/BBvideo]

User avatar
jhsa
Posts: 17724
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: T9X OpenTx buttons problem - flashing via USBAP

Post by jhsa » Fri May 29, 2015 12:05 pm

JiriBenes wrote: I used the the latest Companion software with the argument -B 100.
Before that on Turnigy firmware buttons acted normally. Sometimes the radio operates normally (about 1 minute - with OpenTx), and then starts to do weird things like on video.

Any ideas?
Did you use companion to download the firmware? What are your configurations? Is the processor setting correct in companion?
Why did you use -B 100? did you have problems to flash the radio before?
Another question, did you use the -F option in the extra argumnts?
I would say the fuses could be messed up. Please read the fuses using companion and post them here.

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

JiriBenes
Posts: 5
Joined: Fri May 29, 2015 7:57 am
Country: -

Re: T9X OpenTx buttons problem - flashing via USBAP

Post by JiriBenes » Fri May 29, 2015 12:33 pm

I had problems with the flashing. Sometimes expected different ID. That is why I use -B 100.
Firmware is downloaded only via Companion.
Radio is V2 version with AT Mega128.
Here is the settings:
Image

I do not use -F argument.

Now I desoldered connector for flashing and everything working properly. :-/ It's probably a problem in soldering.


User avatar
jhsa
Posts: 17724
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: T9X OpenTx buttons problem - flashing via USBAP

Post by jhsa » Fri May 29, 2015 12:51 pm

Are you sure you have an Atmega128 in your turnigy 9x? they normally come with the atmega64

If you didn't change the chip, it will have an Atmega64 not an Atmega128..

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

JiriBenes
Posts: 5
Joined: Fri May 29, 2015 7:57 am
Country: -

Re: T9X OpenTx buttons problem - flashing via USBAP

Post by JiriBenes » Fri May 29, 2015 2:03 pm

here is pic Image

ReSt
Posts: 1451
Joined: Tue Dec 27, 2011 11:34 pm
Country: -

Re: T9X OpenTx buttons problem - flashing via USBAP

Post by ReSt » Fri May 29, 2015 2:45 pm

This is the new board, version 15, as it is sold from HK as spare

Reinhard

User avatar
jhsa
Posts: 17724
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: T9X OpenTx buttons problem - flashing via USBAP

Post by jhsa » Fri May 29, 2015 2:49 pm

Hmm, that is new, since when is the 9x radio sold with an atmega128.. We know that the replacement boards are sold with the 128, but it is the first radio i see with that chip..

Is the radio now working ok after desoldering the wires?
Did you leave the programmer attached to the radio before? some programmers can't be left connected to the radio..

João

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

JiriBenes
Posts: 5
Joined: Fri May 29, 2015 7:57 am
Country: -

Re: T9X OpenTx buttons problem - flashing via USBAP

Post by JiriBenes » Fri May 29, 2015 4:48 pm

Yeah radio now working. I ordered this radio last month and come with this board.

User avatar
jhsa
Posts: 17724
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: T9X OpenTx buttons problem - flashing via USBAP

Post by jhsa » Fri May 29, 2015 4:55 pm

It's great that it works now.
And also it is great that the 9x now comes with the Atmega128A chip. Shame they didn't go for the Atmega2561 instead. But better than nothing :) ;) :D

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

Post Reply

Return to “PROGRAMMERS”