elevon rates ?

Post Reply
griff83
Posts: 11
Joined: Sat May 31, 2014 6:43 pm
Country: -

elevon rates ?

Post by griff83 »

Hi just set up my teksumo and mixed ok very easy but on test flight I noticed that the down elivator was very sensitive I went into rates and as far as I can see I can only decrese both up and down movements by changing weight? What I would like is to have the down movement of the elivator at 50% and still have full throw of up movement is this posdible ?

User avatar
KAL
Posts: 552
Joined: Thu Oct 10, 2013 4:36 pm
Country: Germany
Location: somewhere near Rothenburg ob der Tauber

Re: elevon rates ?

Post by KAL »

In the limits menu you can change the overall limits for up and down separately.
With newer firmwares (don't know since when) you can change rates separately by holding the stick into the intended direction.

Also in eePe you can set this parameters.

Edit:
And there's even the option to use user defined curves ...

You may see that in many cases there are multiple ways to achive the desired result.

Klaus
( TH9X / 9XTreme / FrSky DHT / Spektrum / Multi / RotEnc )
( 9XR PRO / erSKY9x  / FrSky DHT / Spektrum / Multi / RotEnc / P3 as Slider )
Post Reply

Return to “er9x model setup”