Where did I see this weird setup?

Post Reply
skorzo
Posts: 1
Joined: Thu Jan 26, 2017 4:46 pm
Country: -

Where did I see this weird setup?

Post by skorzo »

Hi! Im from Spain and recently I bought an X9D Plus Taranis.

I read through the OpenTX and Companion app PDF manuals and I watched some Youtube videos, and finally my 2 quads (Zmr250 and QX95) are flying ok.

However I realized that I set a weird configuration for aux channels, that of course I have corrected and now the configuration is cleaner.


Please find attached an eepe file where you can see how I set 3 several inputs (100 / -100 / 0 ) for each aux channel, when it was enough with placing just one mix line for each aux, setting the right Switch as input, and leaving the inputs tab without lines for Aux.

My question maybe weird but...please!! :roll: :roll: :roll: I need to find WHERE did I see that way of setting up the aux channels! Or of course, If you have any clue about what is the point with making the setup in that way, I will appreciate it SO much.

Thansk!
Attachments
Why_3_lines.eepe
(77.03 KiB) Downloaded 379 times

rdeanchurch
Posts: 750
Joined: Tue Dec 27, 2011 11:22 pm
Country: United States
Location: Carson City, Nv

Re: Where did I see this weird setup?

Post by rdeanchurch »

I see no point in setting it that way.
There is no use for any of the Inputs but the first one that is true. Since none of those inputs have a qualifier, A switch or curve, only the first Input does anything.

There is no advantage to using Switch as a source in Inputs that I know of.

A single Mix of source, like SwA wight MAx has the same affect.
Dean
OldDmbThms: 1. Takeoff, 2. Crash, 3. Repair, GOTO 1
Post Reply

Return to “openTx model setup”