Setting failsafe on Taranis

Post Reply
Erni
Posts: 27
Joined: Wed Jun 04, 2014 3:41 pm
Country: -

Setting failsafe on Taranis

Post by Erni »

I have updated my Taranis to openTx 2.015 and it seems that I no longer can set the failsafe on the Taranis itself anymore.
If I set the Failsafe in Companion and upload to the radio it works
If I try to do the same on the taranis I can only set the failsafe to -0.8 ??

Argh, all ok, you just need to do a long press on Ent, and not the short press I was using

Below is a screendump of the setting in Companion
failsafe.jpg

Post Reply

Return to “openTx model setup”