Throttle curve for Multirotor

Post Reply
User avatar
Malcurin
Posts: 61
Joined: Fri Apr 20, 2012 7:58 pm
Country: -
Location: Matamata New Zealand
Contact:

Throttle curve for Multirotor

Post by Malcurin »

Can anyone help me, I am trying to setup a throttle curve for a Mini quad, atm after setting the endpoints calibrating the esc's and in a Naze32 my hover is at 10% i am running cleanflight and also running the latest firmware in my Taranis i want to make that throttle hover somewhere more like 50% and using expo dosent seam to help, it just moved my deadzone where it falls up higher on the stick have been playing inside of the Naze but it dosent help, Is there anything i can do transmitter side?
Thanks
Mike
Turnigy 9x with ER9X and back light FrSky DHT 8ch DIY, FLD-02 Telemetry Display Screen
AXN with 6x4 prop .... AWESOME!!!!!!!
Canterbury Sailplanes Jazz 60 and Eraser 60
Dyna-flight Butterfly ( under construction )

User avatar
bob195558
Posts: 2377
Joined: Sun Dec 16, 2012 7:24 pm
Country: United States
Location: New England, Vermont
Contact:

Re: Throttle curve for Multirotor

Post by bob195558 »

Hi Malcurin,
Have you looked at these ?
Making Throttle hold the priority on helicopter: (search.php?st=0&sk=t&sd=d&sr=posts&keyw ... ttle+curve)
and
Programming Ele mix with throttle: (viewtopic.php?f=102&t=6674&p=92603&hili ... rve#p92491).

Bob B.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
Post Reply

Return to “openTx model setup”