x quad copters

Post Reply
User avatar
sonnier00
Posts: 10
Joined: Tue Nov 13, 2012 7:04 pm
Country: -
Location: Dodge, Tx. USA

x quad copters

Post by sonnier00 »

Has anyone set up their quad x using openTx and if so where can i get a temples are even a eepe
Nathan
Just trying to have fun.
Hopeing to have fun.
You all help me have fun.
THANK YOU ALL!!!!!

mpjf01
Posts: 367
Joined: Thu Jul 26, 2012 3:07 am
Country: -
Location: Adelaide, Australia

Re: x quad copters

Post by mpjf01 »

Help us with a little more information please. Is "quad x" a model of something already made or a configuration description for something you have (Google didn't help me with the first)?
User avatar
Rob Thomson
Site Admin
Posts: 4543
Joined: Tue Dec 27, 2011 11:34 am
Country: United Kingdom
Location: Albury, Guildford
Contact:

Re: x quad copters

Post by Rob Thomson »

Believe he is referring fo the rotor configuration.

Regardless - the configution is thw job of the flight controller. Simple 4ch model is all opentx needs to supply.
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
mpjf01
Posts: 367
Joined: Thu Jul 26, 2012 3:07 am
Country: -
Location: Adelaide, Australia

Re: x quad copters

Post by mpjf01 »

That's true, unless the device has a flight controller with flight modes, panic options and autotune option, such as anything using Arducopter, all of which use channels beyond the 4.
arizona98tj
Posts: 11
Joined: Sat Nov 15, 2014 12:04 am
Country: -

Re: x quad copters

Post by arizona98tj »

sonnier00,
Did you find what you were looking for?

User avatar
sonnier00
Posts: 10
Joined: Tue Nov 13, 2012 7:04 pm
Country: -
Location: Dodge, Tx. USA

Re: x quad copters

Post by sonnier00 »

Yes sorry it took me so long to get back. yes that's true this need a simple 4 channel and then you add in your switches that you need. I'm using a pixhawk fc and you need a total of at least 8 channels set up . I had done some before so it took me a while and then I'll come back to me thank you guys anyway
Nathan
Just trying to have fun.
Hopeing to have fun.
You all help me have fun.
THANK YOU ALL!!!!!

Post Reply

Return to “openTx model setup”