Advice please guys - this issue has me nearing hammer & then slight regret.
Mac user - using `Companion` to aid programming this %^%# radio.
All goes reasonably well -TX on - software reads model from radio - I then set up model via the right click wizard in the `.eepe box`.All good. I then `write model and settings to Tx,with a confirmation success.;`]
Then the bloody Tx won't unmount, likewise the `Taranis folder on the desktop, or the `no-name` file that accompanies it. At this point the info displayed on the still switched on Tx [For eprom write] is still reading old data model name. Has it written or not?
So - unable to unmount [dont say it] - i close the program and pull the usb.This then generates the `Bad EEprom data` display and I'm back to square one.
Now where is that hammer…….
HelpPlease
Companion MAC write Unmount
Companion MAC write Unmount
Last edited by F11oneone on Sat Aug 09, 2014 5:03 am, edited 1 time in total.
Re: Companion MAC write Unmount
Just to add - 208 is the companion version / and when opening immediately states - unable to check for updates
Tx FW is r2940 eepr215?
Tx FW is r2940 eepr215?
Re: Companion MAC write Unmount
2940 had a bug and will indeed autoremount. Just disconnect ignoring it.
And you need to have firmware 2.0 to edit models with companion 2.0, firmware 2940 will not recognize settings made by companion newer than 1.52.
Sent via mobile
And you need to have firmware 2.0 to edit models with companion 2.0, firmware 2940 will not recognize settings made by companion newer than 1.52.
Sent via mobile
Re: Companion MAC write Unmount
Thank you for the prompt reply -
As a newbie
- in essence, so I down grade companion to V2.0 and that should clear the `bad eeprom data `warning - when i pull the cord.
Apologies for sounding as if i don't know what the hell I'm doing….its because….I don't know what the hell I'm doing.
Many thanksKilrah
As a newbie
- in essence, so I down grade companion to V2.0 and that should clear the `bad eeprom data `warning - when i pull the cord.
Apologies for sounding as if i don't know what the hell I'm doing….its because….I don't know what the hell I'm doing.
Many thanksKilrah
Re: Companion MAC write Unmount
Not 2.0. If you want to keep firmware 2940 on the radio you must use companion9x 1.52.
Sent via mobile
Sent via mobile
Re: Companion MAC write Unmount
Thanks / thats cleared that up :-]
Just asking - but is there a FW that works with 2.08? and should i change that instead [keeping up with the companion]
sean
Just asking - but is there a FW that works with 2.08? and should i change that instead [keeping up with the companion]
sean
Re: Companion MAC write Unmount
Yes of course, you can download and flash firmware 2.0.8. Just be aware it has a lot of changes, and read the 2 posts linked here:
viewtopic.php?f=96&t=5991&p=84586&sid=6 ... f20#p84519
viewtopic.php?f=96&t=5991&p=84586&sid=6 ... f20#p84519
Re: Companion MAC write Unmount
Its working - Thankyou Kilrah/Genius