Search found 16821 matches

by MikeB
Tue May 30, 2023 10:09 pm
Forum: erskyTx (was ersky9x)
Topic: MasterRadio TX16S
Replies: 224
Views: 301065

Re: MasterRadio TX16S

I've posted a P13r224 for the TX16S.This has the bind timing changed so may work as before.

Mike
by MikeB
Mon May 29, 2023 9:31 pm
Forum: erskyTx (was ersky9x)
Topic: MasterRadio TX16S
Replies: 224
Views: 301065

Re: MasterRadio TX16S

I added something to make the binding operation timeout (after about a minute!). It looks like this may have upset detecting the MPM reporting bind has completed when it occurs. It may, however, detect the bind completing after 56 seconds. Please could you try binding, but wait at least a minute aft...
by MikeB
Sun May 28, 2023 4:47 pm
Forum: erskyTx (was ersky9x)
Topic: MasterRadio TX16S
Replies: 224
Views: 301065

Re: MasterRadio TX16S

I'm not sure what the problem might be. I don't have any Flysky2A receivers to test with, but I tested an original Flysky receiver and that binds and a DSMX receiver also binds correctly with the Tx seeing the DSM bind response. So I believe communication with the MPM is working correctly. I current...
by MikeB
Sat May 27, 2023 6:46 pm
Forum: erskyTx (was ersky9x)
Topic: MasterRadio TX16S
Replies: 224
Views: 301065

Re: MasterRadio TX16S

I have the fix for the expo setting bug.
Please confirm the bind (with the same settings) was working before you did the upgrade to R224P12.

Mike
by MikeB
Fri May 26, 2023 11:28 pm
Forum: Hardware
Topic: Turnigy 9X Upgrading to the ATmega128 CPU Chip
Replies: 3
Views: 7398

Re: Turnigy 9X Upgrading to the ATmega128 CPU Chip

Probably two mixes on the channel:
CH4 +100% Rud
CH4 R +30% Rud switch(ELE)
Note that the second mix is a "Replace" mix

Mike
by MikeB
Fri May 26, 2023 11:13 pm
Forum: Hardware
Topic: Turnigy 9X Upgrading to the ATmega128 CPU Chip
Replies: 3
Views: 7398

Re: Turnigy 9X Upgrading to the ATmega128 CPU Chip

Posted on behalf of TheCirodi: Is it possible to set a conditional limit on a mix? Let's say that I have rudder on channel 4 and that I would limit it as servo excursion to a certain amount (eg. 30%) if a switch is not triggered (eg.Idle up switch is in position 0) and 100% if is triggered (idle up ...
by MikeB
Fri May 26, 2023 11:02 pm
Forum: erskyTx (was ersky9x)
Topic: ErskyTx on X20
Replies: 296
Views: 770262

Re: ErskyTx on X20

r18 now posted.

Mike
by MikeB
Fri May 26, 2023 10:44 am
Forum: erskyTx (was ersky9x)
Topic: ErskyTx on X20
Replies: 296
Views: 770262

Re: ErskyTx on X20

Good, looks like I now know what I need to do for FCC/EU-LBT. I'll do a r18 with the snooping removed. The default channel order (used when creating a new model or applying a template) is set in "Radio Setup|Controls". If you change it to AETR, then apply the "Simple 4-CH" templa...
by MikeB
Thu May 25, 2023 10:36 pm
Forum: erskyTx (was ersky9x)
Topic: ErskyTx on X20
Replies: 296
Views: 770262

Re: ErskyTx on X20

This might sort the problem. It seems I hit a FCC/EU-LBT problem. I probably need to do something better than here in 17d, but this should work (Now removed as r18 released). In the protocol menu, when you select ACCST, there is an entry for "Country". This now selects between FCC and EULB...
by MikeB
Thu May 25, 2023 3:49 pm
Forum: erskyTx (was ersky9x)
Topic: ErskyTx on X20
Replies: 296
Views: 770262

Re: ErskyTx on X20

This should fix the problem of Ethos not running (Now removed as r18 released). Check the next post! What do you get fro the HW and FW versions of the internal module? Mine reports: TD-ISRM HW:1.4.0 FW:2.2.2 (EU-LBT). I may need to improve the snooping! Are you still running Ethos 1.4.8 FCC? I will ...
by MikeB
Wed May 24, 2023 10:06 pm
Forum: erskyTx (was ersky9x)
Topic: ErskyTx on X20
Replies: 296
Views: 770262

Re: ErskyTx on X20

Try this "17b" (Now removed as r18 released). It still does the "snooping", but, hopefully, it should detect the board type correctly and power the internal module correctly. The Debug menu has an extra line with information from erskyTx as well as the snooping data from Ethos. I...
by MikeB
Tue May 23, 2023 10:30 pm
Forum: erskyTx (was ersky9x)
Topic: ErskyTx on X20
Replies: 296
Views: 770262

Re: ErskyTx on X20

I've found a small bug that may explain the problem and I also understand more about how to detect the board type. I think erskyTx on your X20S is making the wrong decision on the board type, and then failing to enable power to the internal module correctly. I'm working on the corrections and hope t...
by MikeB
Tue May 23, 2023 2:02 pm
Forum: erskyTx (was ersky9x)
Topic: ErskyTx on X20
Replies: 296
Views: 770262

Re: ErskyTx on X20

OK, that worked so I have something to look at!

Mike
by MikeB
Mon May 22, 2023 2:49 pm
Forum: erskyTx (was ersky9x)
Topic: ErskyTx on X20
Replies: 296
Views: 770262

Re: ErskyTx on X20

I can't see any reason for the "snooping" not to work (I've checked 1.4.8 should be OK). Please could you repeat building the composite file (and flash it), knowing you have 17a running. At step 4, the top few lines on the display should be blank and then, when you use the encoder button o...
by MikeB
Mon May 22, 2023 8:48 am
Forum: erskyTx (was ersky9x)
Topic: ErskyTx on X20
Replies: 296
Views: 770262

Re: ErskyTx on X20

The "snooping" didn't work. What version of Ethos are you using? It may be something has changed so the snooping is not correct. Please confirm you used "r17a" to create the composite file. Please confirm "r17a" is running when you have the dual boot working. Please con...
by MikeB
Sun May 21, 2023 4:51 pm
Forum: erskyTx (was ersky9x)
Topic: ErskyTx on X20
Replies: 296
Views: 770262

Re: ErskyTx on X20

Looks basically correct. There is likely something I don't know about the X20S hardware. I've built a special version of erskyTx hat manages to "snoop" on certain things while Ethos is running. If you would be so good as to follow the following I should get some very useful information. At...
by MikeB
Sun May 21, 2023 4:33 pm
Forum: erskyTx (was ersky9x)
Topic: MasterRadio TX16S
Replies: 224
Views: 301065

Re: MasterRadio TX16S

I'm actually changing all screens to use the top left corner as the exit. The button at the top right was something I quickly added when I first got touch working so it now appears by default if a screen has not been converted to be "touch friendly". Many devices appear to use an arrow at ...
by MikeB
Sat May 20, 2023 8:35 am
Forum: erskyTx (was ersky9x)
Topic: ErskyTx on X20
Replies: 296
Views: 770262

Re: ErskyTx on X20

I do need the .raw file, you may attach it if you put it in a .zip file (in windows, right click on the file and select "send to", then select "compressed (zipped) folder").

Mike
by MikeB
Fri May 19, 2023 3:23 pm
Forum: erskyTx (was ersky9x)
Topic: ErskyTx on X20
Replies: 296
Views: 770262

Re: ErskyTx on X20

Please could you create a "raw log file" of the data being received, instructions here: viewtopic.php?p=155729&hilit=raw#p155729. Zip the file up and post it for me to look at.

While logging the data, you could try binding.

Mike
by MikeB
Fri May 19, 2023 12:00 pm
Forum: erskyTx (was ersky9x)
Topic: ErskyTx on X20
Replies: 296
Views: 770262

Re: ErskyTx on X20

May be something in erskyTx running on a X20S controlling the internal module I haven't got correct. On the DEBUG menu (Statistics from the main popup then go left a few times) is the value beside "TelRxCount" changing? If it is not changing, then erskyTx is not driving the internal module...
by MikeB
Fri May 19, 2023 8:31 am
Forum: erskyTx (was ersky9x)
Topic: ErskyTx on X20
Replies: 296
Views: 770262

Re: ErskyTx on X20

Not obvious, but you don't need to scroll down, just press the Enter button (encoder button on the right). Having created "composite.bin", you may start the radio in bootloader mode, connect to your PC, an then use normal PC commands to rename "composite.bin" to "firmware.bi...
by MikeB
Thu May 18, 2023 2:40 pm
Forum: erskyTx (was ersky9x)
Topic: ErskyTx on X20
Replies: 296
Views: 770262

Re: ErskyTx on X20

"r17" now posted, this may handle the internal module power properly. New feature in "Radio Setup|Display", you may configure up to 4 "Themes". Each of these has colours for the text and background and the display brightness. You may like certain colours normally, but n...
by MikeB
Thu May 18, 2023 2:25 pm
Forum: erskyTx (was ersky9x)
Topic: ErskyTx on X20
Replies: 296
Views: 770262

Re: ErskyTx on X20

Nothing special. If you have the module bound, then if you swap back to erskyTx it should control the servos without needing to bind again (make sure you have the same RxNum set as Ethos). There are two, different hardware builds (at least) of the X20, and the signal that turns the power on to the m...
by MikeB
Wed May 17, 2023 9:01 am
Forum: erskyTx (was ersky9x)
Topic: ErskyTx on X20
Replies: 296
Views: 770262

Re: ErskyTx on X20

On this screen:
ACCST1.png
ACCST1.png (7.75 KiB) Viewed 40470 times
Highlight the lower ACCESS item (as shown) and either press the encoder button or touch the icon on the right halfway down the screen. The display should change to:
ACCST2.png
ACCST2.png (6.54 KiB) Viewed 40470 times
I just did this with "16a" and captured the screens.

Mike
by MikeB
Tue May 16, 2023 11:24 am
Forum: erskyTx (was ersky9x)
Topic: MasterRadio TX16S
Replies: 224
Views: 301065

Re: MasterRadio TX16S

Current button functions:
SYS - MENU
RTN - EXIT
PAGE> - UP
PAGE< - LEFT
TELE - DOWN
MDL - RIGHT

So the MDL button provides to opposite of the PAGE< button.

Mike
by MikeB
Tue May 16, 2023 11:12 am
Forum: erskyTx (was ersky9x)
Topic: ErskyTx on X20
Replies: 296
Views: 770262

Re: ErskyTx on X20

I forgot I've updated that menu for touch in the last couple of days!
However, you should still be able to change the "Mode" entry from ACCESS to ACCST(D16).

Mike
by MikeB
Tue May 16, 2023 9:05 am
Forum: erskyTx (was ersky9x)
Topic: ErskyTx on X20
Replies: 296
Views: 770262

Re: ErskyTx on X20

You should be able to select ACCST(D16) in the internal module protocol menu:
ACCST.png
ACCST.png (6.44 KiB) Viewed 40545 times
Mike
by MikeB
Mon May 15, 2023 4:21 pm
Forum: Hardware
Topic: HELP, Adding 3pos switches to 9XR PRO
Replies: 32
Views: 19451

Re: HELP, Adding 3pos switches to 9XR PRO

I've not allowed for replacing the trainer switch with a 3-pos switch, only ordinary 2-pos switches. Is this the only switch you wish to convert to 3-pos? If so, one way would be to wire the THR switch to where the TRN switch connected and then wire the new 3-pos switch to the THR switch and an extr...
by MikeB
Mon May 15, 2023 9:04 am
Forum: erskyTx (was ersky9x)
Topic: ErskyTx on X20
Replies: 296
Views: 770262

Re: ErskyTx on X20

On the protocol menu change the "Mode" from ACCESS to ACCST(D16). It works fine, I was flying yesterday with my X20 using ACCST and a D8R-XP rx running UNI firmware.

I'm investigating how to drive the internal ISRM module to enable the 900MHz part.

Mike
by MikeB
Sun May 14, 2023 10:01 pm
Forum: ersky9xr
Topic: How to save Telemetry data on SD card?
Replies: 2
Views: 6587

Re: How to save Telemetry data on SD card?

Currently, you may log the data to the SD card, but there is no way to view the logged data on the radio.
I think the (built in) telemetry screen that shows Lat, Lon, Alt, Spd and the 6 cell voltages (V1 to V6) continues to show the last received Lat and Long until the radio is powered off.

Mike

Go to advanced search