openrcforums

HI,
Yes i bought the diy dht one.Opening a thread for comparisons is a good idea?.
les

João thanks,
Ive dealt with the chinese before,dont think i would bother with them.Just thought HK might have been a bit more concerned.
I have a Frysky module to fit,so will do that for safety sake.
Les

Mike,
Is it worth contacting Hobbyking with our concerns. Although i expect they would say we need to heed the warnings re Radio on first.
What do you think?.
Les

Yes i wondered too. Was it intentional, wonder if it worth asking Hobbyking(where i got mine from) about this
from a safety point of view.
Les

Hi All, Have just changed the RF Module from the Ersky9x transmitter(the experiencing the problem) with one from a radio that works ok and now the Faulty one is fine. To Summarise the above problem for those that are not up to speed. There are two versions of the 9X Stock RF module, one will output ...

Thanks Gohst, Checked both radios, Both have ch 4,5 with pulses when Radio is off. Both radios are the same when turned on and ready to fly. The difference is when the SPASH SCREEN or WARNING SCREEN is ACTIVE. That is on the ERSKY9X modded radio the same amplitude and pusle width that appears on ch4...

Hi Gohst, I think your suspicions may be right. Ive quickly scoped the input to the Rf module and there are no ppm pulses to the RF module untill the splash screens and warnings are gone. All of this time with no ppm sigs to rf module there are 1ms pulses sent to servo connected to ch 3. Do they pro...

So you are saying it would be best to measure while RF module connected.

Wilt : No you are not. I never noticed it because i always had the radio on before the model. Gohst: Thanks for your reply, Can i get to these pulses easily ,say without pulling the radio to pieces. Like if i pull out the RF Module and probe the socket this is plugged into. Logic analyser is a no so...

Guys, Im one of the unlucky ones suffering from this. Can i scope the input to the RF module and see what data stream im inputing to the rf module. I notice on my 9x with ersky9x fw and skynorths board that as soon as i turn the transmitter on there is a 1ms pulse being sent to the servo i have conn...

Hey Guys, Lets give Hippo a bit of breathing space. He probably got a lot more orders than he realised he would get and is possibly overwelmed. DIY and hacks usually dont come neatly packaged like normal transactions. Ive ordered 3 sets and have heard nothing but im not uptight as im just grateful s...

Big Thankyou and Well done.
Les

Sorry Guys,
May have mislead you, the Controller board fitted is the new Ersky9x board from Skynorth. Getting confused with my other radio that has all stock
parts plus Mikes Audio board and works fine on ER9x and Open9x software.

Les
I did see Mike did test with his ersky9x board.

Thanks
Les

Hi Kilrah,
Back in March of 2012 from hobbyking.
Les
P.S is it possible that it has some failsafe features. I looked at the manual from hk for the 9x and it talks about f/s with the receiver and how to get
into it with their sw. But i thought they didnt have f/s,im confused.

Mike , Thanks for replying, just compiled a great reply and F-----G wouldnt let me preview my reply and then i couldnt get back onto the site. Sorry this one going to be an abreviated one. I set up the receiver with an external battery and servo plugged into Channel 3 via a y connector so i could sc...

Hi Guys,
I have to go to work now,but can someone list what you would like me to do and in what order i will try and see what is causing this.
Will try anything this evening and report back.
Thanks for your efforts.

Les

Hi Mike,
Thanks for replying. Ive left my ersky9x setup as described above so if i can test anything please just ask.
Les

Hi Wilt, I can confirm i get your results, full speed ahead. when tx turned off and then on with model powered up. My details, Ersky9x Rev B board(skynorths) Stock RF Module BT installed. Haptic Speaker HobbyKing 30a esc Stock receiver(came with the 9x) Software version r110 V:1124 Dated 7/9/2012 No...

Martin, Thanks and very interesting. Thomas who has done a pcb for Mikes board wa sthe one that alerted me to the fact that his voice files did not work properly and thought it was his hardware. So thats two of us that had this problem. Ive informed Thomas of your files so hope he will try them also...

Hi mhotar, Thanks for the file, its good with this one. What i was getting is a short burst of sound on pwer up. At present i have not calibrated and it gives a throttle warning followed after a short gap with a couple of words, it all happens quickly. then the throttle warning and extra words occur...

Hi All, Is there anyone out there using Open9x(latest Version),stock board with Mikes module and English Sound file downloaded via Companion9x. Im still getting extra sound after the right message is spoken before it repeats. As im new to all of this i just want to know that its working ok or do i h...

Gabriel,
Thanks for replying. Have you downloaded the english one and tried them.
The Czech play alright on my module. The module has all parts as per mike article.
i am NOT using the micro sd version.
Les

João,
Got a reply from JB and he has found a cheaper freight method and is supplying in flat pack form.
Just ordered a Red one.
Thanks for the Intro to the tray.
Les

Hi Bertrand, Have d/loaded english files and find that audio messages seem to have a gap after the message followed by one word then it will repaest the message. Ive just tested with battery low warning and there are a total of two gaps before repeating. I have d/loaded the czech version and it is o...

Hi Bertrand,
Yes im using Companion9x, still pretty new to this, didnt spot the ability to d/l audio files. Will have another look tonight
Thanks

les

Hi All, Not having much luck at getting sound out on Open9x. Er9x works fine. Latest version of Open9x on stock board with no frsky and using sound files for er9x stored in root of sd card and no folder. When i listen closely to the speaker and have a low battery waring operating i can hear a hissin...

Hi João,
Thanks for asking. I was hoping a flat pack version may have lowered the cost a little. Will look forward to his reply.
I like the idea of the tray enclosed, very handy.
Les

Joäo, Thanks for the intro to this tray. Have you had much time to try it out yet?. Very interested in getting one, freight is a bit of a killer to this part of the world NZ,(half cost of the unit). Want to satisfy myself before committing. I really need one as i find hand launching my powered glide...

Hi thomas,
nice job on the Sound board. Are you going to make them available for sale?. Havnt quite got onto building your Hub/Gps module yet,have all the parts now.
Thanks
Les