openrcforums

Could you post the file?

Did you use the same radio profile in Companion and hence the same firmware file for both radios?
Or
Did each radio have its own radio profile in Companion and hence a different firmware file?

With any firmware change make sure you do a backup using companion. “Read/Write” menu: Backup Radio to File: Read the EEPROM contents (model and transmitter settings) from the transmitter directly into a file. This is the preferred way to backup the transmitter and model settings as it will be saved...

In RF D16 mode 16 channels are transmitted if the channel range is set to 1-16. The bind option determines if the servo pins are mapped to the first 8 channels or the second 8 channels. Further it also determines if telemetry from the receiver is turned on or off. This is useful when using two recei...

My understanding is that he is saying:
His setup works with 2.2.0 but does not work with 2.2.1.
External module bay occupied by the multi-module so he does not use it for wireless training.
He uses the battery bay serial port for sbus wireless training. This works under 2.2.0 but not under 2.2.1.

Correct.

Special Function
Play Value
http://rcdiy.ca/opentx-guide/opentx-tra ... functions/

OpenTX 2.2.1 is close to being released. It is currently in the release candidate stage. Release candidates are for early adopters to help test and report back needed fixes. I’ve posted a video and accompanying documentation going over the additions, changes and bug fixes. Check out the blog post an...

Suggest you use the S6/8R with the latest firmware version.
As always MikeB is correct:)

This script mimics the start sequence for quad racing. Pilots get their quads ready on the start line. They then return to their seats and get ready to race. The race official tells them to arm their quads and then after a random delay sounds a start buzzer. To use the script: * The pilot activates ...

With the TBS Crossfire system theres no GSpd sensor provided, only GPS and Altitude which is why I was wondering. Maybe its just so they can try to get people to buy their whole system to get the extra 'features' A GPS script may work for you. All it needs is the sport sensor name as it appears on ...

rcdiy wrote: ↑Wed Nov 01, 2017 4:23 pm The iMSB app needs the accompanying bluetooth device.

So no. You need both app and device.

I have the FrSKY airlink/bluetooth module and tried their app. I can't get it to work.I would love it if someone would help me get it working. I started trying to evaluate it and since I could not get it working flawlessly started doing google searches and came across iMSB. iMSB just works for me!!!...

IMG_5710-copy.jpg The iMSB module brings telemetry to an iPhone, iPad and iPod touch. The app displays and announces telemetry and has hands free controls. Alarms may be configured to make announcements such as when the aircraft get past a configured height. The module connects to FrSKY transmitter...

Skatch? What is that?

Balance bar power on video
https://youtu.be/6OsQKkL4lD0

The next version of OpenTX 2.2.1 will have a shutdown warning if rx is connected. An audio alert and a screen prompt that one has to clear by pressing enter to complete shutdown. This is optional and can be configured on the radio menu setup screen.

Web Manual http://rcdiy.ca I have published an OpenTX Manual with help from the developers and community members. This manual is frequently updated especially if an error is reported. The table of contents provide a way to quickly access documentation related to specific transmitter screen. The Ope...

I've written a new document for setting up the trainer

Let me know of any errors, omissions and suggestions.

http://rcdiy.ca/opentx-transmitter-firm ... s/trainer/

This may be better
http://seancull.co.uk/2014/06/26/config ... tionality/

See
http://rcdiy.ca/wireless-trainer-link-cppm/
Where is says “Trainer Port” select the “Master/CPPM Module” Trainer Mode
Use Master/Jack or Slave/Jack
The rest of the instruction should generalize... if not let me know and I'll have to write a new guide...

Not directly.
I had to monitor Telemetry values to figure it out.
For example
Gps pilot location only changes when a reset is done
So if prev not = current gps pilot lat or long
Reset has occurred

I have published two new videos and documentation on setting up OpenTX to display Head Speed. Head Speed By Configuring An OpenTX RPM Sensor http://rcdiy.ca/heli-head-speed-sensor/ https://www.youtube.com/watch?v=hdnJ-Ml94w0&feature=youtu.be Head Speed Using A Lua Script http://rcdiy.ca/head-spe...

Yes
See
https://opentx.gitbooks.io/opentx-2-2-l ... e/content/
I'm on the road using my mobile else Id give the exact page to look at.
My battery remaining script accesses logical switches.

In the manual
https://opentx.gitbooks.io/opentx-2-2-l ... Value.html

http://downloads.open-tx.org/2.2/firmwa ... ds_x9d.txt
Last line tx-voltage

You can use lua scripts. Might be overkill but it is an option. Some examples are here http://rcdiy.ca Developer Manual https://opentx.gitbooks.io/opentx-2-2-lua-reference-guide/content/ It was mentioned to me that quality of ESC effects how steady the RPM readings will be. I do not know much about ...

There has been talk of having the option to have the Taranis go straight to the Telemetry screen. https://github.com/opentx/opentx/issues/5156 If that is implemented you may want to have the model name show up on that screen.... Maybe show name and disappear after a few seconds if you don't have spa...

https://opentx.gitbooks.io/opentx-2-2-lua-reference-guide/content/lcd/lcd_functions-overview.html The run function is periodically called when the screen is visible. In OpenTX 2.0 each invocation starts with a blank screen (unless lcd.lock() is used). Under OpenTX 2.1 screen state is always persiste...

- If I draw a line or rectangle and starts the simulator, the line or rectangle is visible, but is rappidly blinking/flickering. Is this a simulator problem? If you send me your code I'll check. Tx? OpenTX version? - Is it possible to align text center or right? No Have you seen this manual? https:...

Using Companion & Simulator OpenTX 2.2 Telemetry Screen 1 Used to display sesnors RPM Sensor Working Created Copies RPM2 RPM3 RPM4 All copies work Next I changed the units/type and renamed the sensors accordingly KMH ratio 1.0 MPH ratio 1.0 RAW ratio 1.0 Now none of the values get update I chang...