openrcforums

[emoji16][emoji16]

Enviado do meu ONEPLUS A5000 através do Tapatalk

jhsa wrote:Ok, so they didn't really die

João

Yes, not really. I have to commit myself, but right now I have more urgent matters to attend to.

Enviado do meu ONEPLUS A5000 através do Tapatalk

One them is on standby because of the rotary encoder mod, I'll have to get back to it, but I don't have the time right now. And the other started having problems with the throttle gimbal, which I have to check the solder, also no time right now. Still have plenty of radios though. 2 9xr pro, 2 taran...

I just finished disassembling and assembling the radio in order to clean the spring loaded pads and where they sit on the main board. For my surprise things are the same. Damn one by one my 9xtreme radios are dying. This was the only one working fine so far,and now gone? Hope there's a fix Mike.

Hi Mike, after flashing the eeprom, the message in IMG_01 shows up; IMG_01.jpg I pressed "any key" and the message in IMG_02 showed up for a short moment, but it returns to IMG_01; IMG_02.jpg IMG_01.jpg After trying for several times the above mentioned procedure and being stuck in the fir...

I just tried that on my 9XT (the file seems to be the .bin file, not compressed). I couldn't reproduce your problem. I'll see if I can add some debug to locate where your problem is occuring. To help, what, exactly, happens on our radio? I get the "Hardware enabled" message, then when I r...

Here it is Mike.

Hi Mike, sorry to keep you wayting, but here it is.
Edit: [file replaced] Sorry again, i think this might be it.

Yes, the message keeps displaying untill i relase the trim switch.

Yes the black square disapears (it only shows up for a second or less) and the boot reason is "WATCHDOG".
Powering on normally shows boot reason "POWER ON".

Yes Mike, the top one is counting very fast, the middle one has a fixed value of "001E" and the bottom one shifts slowly between "0000" and "0002" back and forth. Hope it helps.

Its 0.7. I always check for updates after new version, test or stable.

Do you think it's wise to put some grease on the pads before assembling the 9xtreme to prevent oxidation?

Enviado do meu ONEPLUS A5000 através do Tapatalk

The square only happens when i try to activate the hardware menu. My guess is that the probable cause will be the comunication problem between the 9xtreme and the mainboard, that Mike describes. I will clean the pads and if the problem persists i will post the eeprom here. Thx for the support.

I also notice that when itry to activate the hidden menus, after i release the required trim switch, a square is shown at the top left corner os the screen and when the radio boots after that, the voltage starts very low and rapidly increases as if the radio resets or crashes.

I also flashed the latest stable ersky9x, and still the error occurs.
Is there a way to reset the eeprom?

Mike, i think its important to mention that eepskye doesnt recognise the file. I am the one to blame, since in a strike of dumbness, i changed the file options when the "new" window poped up.

Mike, perhaps it is a good idea to implement different file extensions for ersky9x and er9x? This would include models, eeproms, general settings, etc.. Could the file extensions have more than 4 characters? For ersky9x and eepskye: eeprom - .epskye models - .epskym General settings - epskyg The pr...

MikeB wrote:That "template" is for er9x. How did you flash it to the radio?

Mike

It was through eepskye. I opened the file through open in eepskye and then sent to radio, by right clicking. Actually I was not aware it was for eepe.

Enviado do meu ONEPLUS A5000 através do Tapatalk

Yes, the message appears and the trim works as expected. I think it happened when I flashed this template to the tx. http://openrcforums.com/forum/viewtopic.php?t=4743 After flashing the radio became weird. I went to eepsky and flashed a blank eeprom (using file/new) but those menus don't unlock. En...

Hi all, i have the latest ersky9x test version (ersky9x_PRO_9xt - 08-Apr-2018 19:49) on a 9xtreme and im not able to activate the hardware nor the eprom menu as stated in the help page. thx

You will probably need zadig to install the stm32 driver.

I recently purchased a brand new (2nd handed, like new) 9xr pro + xjt module+ x8r receiver+ 9xr pro lipo battery pack+ telemetry cable for 70€. Man what a bargain. Now I have plenty of spare parts.

Enviado do meu ONEPLUS A5000 através do Tapatalk

I made a voice pack today geared towards what I wanted. I wanted to share it. I used Cereproc.com Voices sound fantastic! I used Heather(english,Scottland). Any way here it is I have tested it on the radio everything works that I have been able to use so far. Ok I have to shorten some file names. I...

Banggood has it, or ebay. But i recommend banggood, its cheaper.

Now i know why so many people hate hobbyking, they just dont give a damn.
Another thing, can you enlighten me?
What is that RF-deck re-design to fix the sensor problem? im not aware of that. care to explain?
And if possible, post a fix.
Thx

MikeB has simplified programming in ersky9x especially getting to the menus. Mike even includes or included pre programmed basic aircraft and servo testing options. I haven’t checked that writing this. I had suggested several years ago that otx and maybe ersky9x, add a menu option that would hide a...

Hi all, where do i place the ersky9x apps? SD root or specific folder? thx

Damn now, what an awesomeness.

Enviado do meu ONEPLUS A5000 através do Tapatalk

Kilrah wrote: ↑Fri Mar 23, 2018 10:04 pm No it is not, it is the newer smart port format.

What, the extra plug in the battery compartment?