Search found 10682 matches
- Sat Apr 09, 2022 10:36 am
- Forum: FRSky Horus radio
- Topic: Broken USB board - How do I upload models?
- Replies: 1
- Views: 3114
Re: Broken USB board - How do I upload models?
You can just put the SD in a reader and use companion's "read from radio" and "write to radio" as if the radio was connected.
- Thu Apr 07, 2022 6:17 am
- Forum: Hardware
- Topic: Help with voltage telemetry for non LiPo batteries and the AIN2 port - Archer R8 Pro and Taranis X9D
- Replies: 7
- Views: 2729
Re: Help with voltage telemetry for non LiPo batteries and the AIN2 port - Archer R8 Pro and Taranis X9D
I'm not aware of that being a model that exists, there's a G-RX8 and an RX8R, but...
- Wed Apr 06, 2022 11:26 am
- Forum: Hardware
- Topic: Driver Taranis controller not recognized by Windows 10
- Replies: 1
- Views: 1154
Re: Driver Taranis controller not recognized by Windows 10
Have you made sure the USB mode is set to Joystick? Did you check in the Joystick control panel that it was detected? Are things moving there? The first time Velocidrone recognized my Taranis controller, but only partially (I was only able to go left and right and that's it). It can't be recognised ...
- Wed Apr 06, 2022 11:08 am
- Forum: Hardware
- Topic: Help with voltage telemetry for non LiPo batteries and the AIN2 port - Archer R8 Pro and Taranis X9D
- Replies: 7
- Views: 2729
Re: Help with voltage telemetry for non LiPo batteries and the AIN2 port - Archer R8 Pro and Taranis X9D
That's what the manual says.
- Thu Mar 31, 2022 7:54 pm
- Forum: Hardware
- Topic: Taranis X9D Powered off mid flight
- Replies: 9
- Views: 10361
- Wed Mar 30, 2022 8:16 pm
- Forum: Hardware
- Topic: Taranis X9D Powered off mid flight
- Replies: 9
- Views: 10361
Re: Taranis X9D Powered off mid flight
Soft power helps IF the conditions are met i.e. they have a setup that provides telemetry and the option to keep on hasn't been disabled... we don't have enough info about the setup though
- Wed Mar 30, 2022 6:26 pm
- Forum: Hardware
- Topic: Help with voltage telemetry for non LiPo batteries and the AIN2 port - Archer R8 Pro and Taranis X9D
- Replies: 7
- Views: 2729
Re: Help with voltage telemetry for non LiPo batteries and the AIN2 port - Archer R8 Pro and Taranis X9D
Yes you can connect battery voltage up to 36V straight to AIN2, then discover sensors on the radio and should be getting something.
- Tue Mar 22, 2022 8:32 pm
- Forum: General help (FrSky Taranis radio)
- Topic: Connecting X9D+ 2019 to iMac?
- Replies: 2
- Views: 3028
Re: Connecting X9D+ 2019 to iMac?
What do you want to do on your computer?
To edit models/settings no driver is needed, there's an additional utility but it's only for flashing firmware in DFU/recovery mode which you should normally never need to do.
To edit models/settings no driver is needed, there's an additional utility but it's only for flashing firmware in DFU/recovery mode which you should normally never need to do.
- Thu Mar 17, 2022 8:16 pm
- Forum: Hardware
- Topic: Frsky DJT diy
- Replies: 1
- Views: 1111
Re: Frsky DJT diy
The DHT is just a DJT without a case, they work the same.
- Wed Mar 16, 2022 6:50 pm
- Forum: openTx
- Topic: OpenTX 2.1 released!
- Replies: 156
- Views: 258985
Re: OpenTX 2.1 released!
No such messages exists in companion as far as I know, and it works here. A screenshot of the actual error might help.
You might need to replace the libs as mentioned here:
http://www.open-tx.org/2021/10/01/companion-downloads
You might need to replace the libs as mentioned here:
http://www.open-tx.org/2021/10/01/companion-downloads
- Wed Mar 16, 2022 6:44 am
- Forum: openTx
- Topic: Lua script for telemetry
- Replies: 2
- Views: 1459
Re: Lua script for telemetry
The number for "telemx" is the slot number on the left.
You might rather want to rename the sensors after their discorvery to something more descriptive and then use those names.
You might rather want to rename the sensors after their discorvery to something more descriptive and then use those names.
- Mon Feb 28, 2022 10:54 pm
- Forum: General help (FrSky Taranis radio)
- Topic: Taranis X9D Telemetry values.
- Replies: 4
- Views: 3627
Re: Taranis X9D Telemetry values.
They're basically bits that say whether the sensor was received from the internal or external module and which receiver from each module. It's there mostly for the FrSky ACCESS system that can receive sensors from multiple receivers at the same time and thus there needs to be a way to differentiate ...
- Mon Feb 28, 2022 10:30 pm
- Forum: General help (FrSky Taranis radio)
- Topic: Taranis X9D Telemetry values.
- Replies: 4
- Views: 3627
Re: Taranis X9D Telemetry values.
- Discovery never stops by itself
- There should not be duplicates, if there are either the sensor has timing issues or there's an issue with the library/implementation
- The number is the source (module/receiver) the sensor was received from.
- There should not be duplicates, if there are either the sensor has timing issues or there's an issue with the library/implementation
- The number is the source (module/receiver) the sensor was received from.
- Tue Feb 15, 2022 3:27 pm
- Forum: openTx for FrSky radios
- Topic: Highest Firmware Version For FrSky X9D Plus
- Replies: 2
- Views: 3022
Re: Highest Firmware Version For FrSky X9D Plus
You can use latest version, update both firmware and SD card, and then do a "factory reset", recalibrate sticks and you'll start ffresh as new.
- Fri Feb 11, 2022 7:38 pm
- Forum: Hardware
- Topic: Jumper t-lite: use of stick movements instead of switches?
- Replies: 4
- Views: 2097
Re: Jumper t-lite: use of stick movements instead of switches?
It depends on the drone, not the radio. Can't say much without knowing what the drone is or what firmware it uses.
- Thu Feb 10, 2022 6:01 pm
- Forum: Hardware
- Topic: Jumper t-lite: use of stick movements instead of switches?
- Replies: 4
- Views: 2097
Re: Jumper t-lite: use of stick movements instead of switches?
Not sure what the question is, but this usually depends on the aircraft and its configuration more than the radio.
- Wed Feb 09, 2022 9:35 am
- Forum: Software
- Topic: Global Tx Battery Timer
- Replies: 4
- Views: 3537
Re: Global Tx Battery Timer
Enter on home screen, it's in the same menu as Model Select.
No, no widget or countdown option for it.
No, no widget or countdown option for it.
- Tue Feb 08, 2022 9:21 pm
- Forum: Software
- Topic: Global Tx Battery Timer
- Replies: 4
- Views: 3537
Re: Global Tx Battery Timer
There is a battery timer in the Statistics menu.
- Sat Jan 15, 2022 10:47 pm
- Forum: Other Electronic Projects
- Topic: MOSFETS BLEW UP in my UPS-CyberPower-1500
- Replies: 9
- Views: 12423
Re: Diodes Blew Up CyberPower 1500
SM6002Ns are MOSFETS, not diodes. All 8 may not be identical, so be sure to check the type of the ones on the back. Could be that one failing took the others, but could also be a fault on the transformer or a serious instantaneous overload on the output. Does the PC / anything else that was connecte...
- Wed Jan 12, 2022 1:43 pm
- Forum: companion9x
- Topic: companion 2.3.14 bin files wont open
- Replies: 1
- Views: 4094
Re: companion 2.3.14 bin files wont open
looks like you have multiple versions of companion installed and it's the old one that's registered to open .bin files in Windows.
- Sat Jan 08, 2022 2:59 pm
- Forum: openTx for FrSky radios
- Topic: Not able to eject transmitter
- Replies: 1
- Views: 2770
Re: Not able to eject transmitter
Try ejecting once and then just unplug anyway.
- Wed Jan 05, 2022 6:31 pm
- Forum: FrSky Taranis radio
- Topic: More 9xd 2019 questions
- Replies: 2
- Views: 3118
Re: More 9xd 2019 questions
You can update everything to ACCST2 but it's not possible to see what version's currently on things.
- Wed Dec 22, 2021 11:10 am
- Forum: FRSky Horus radio
- Topic: Sudden lost of Models
- Replies: 3
- Views: 3279
- Wed Dec 15, 2021 9:17 pm
- Forum: openTx
- Topic: Jumper T12 Open Source 16ch Radio with JP4-in-1 Multi-protocol RF Module
- Replies: 32
- Views: 32873
Re: Jumper T12 Open Source 16ch Radio with JP4-in-1 Multi-protocol RF Module
What's your cause for concern? It's the seller/importer's responsibility, not yours. As long as you buy one in the US then the seller will have made sure it's valid, and there have been multiprotocol radios sold there for quite a while.
- Wed Dec 15, 2021 6:38 pm
- Forum: Software
- Topic: X9D+ 2019 SE with OPenTx for Mac
- Replies: 1
- Views: 2780
Re: X9D+ 2019 SE with OPenTx for Mac
If it's currently got the frsky factory firmware and you're sure you're flashing the correct file just disable the hardware check.
- Thu Nov 11, 2021 7:26 pm
- Forum: openTx
- Topic: Open TX companion and radiomaster TX12
- Replies: 2
- Views: 3104
Re: Open TX companion and radiomaster TX12
You totally can.
- Mon Nov 08, 2021 11:18 pm
- Forum: Software
- Topic: EEPROM warning
- Replies: 2
- Views: 3086
Re: EEPROM warning
Means your memory is full, models aren't stored on the SD so the only thing is have fewer of them, use the "archive" function, or simplify them so they take less space (usage is written next to the names).
- Mon Nov 08, 2021 11:15 pm
- Forum: Software
- Topic: What do we used for "D8"
- Replies: 2
- Views: 3437
Re: What do we used for "D8"
Only with an external module
- Mon Nov 08, 2021 2:59 pm
- Forum: Software
- Topic: Lost "Cells"
- Replies: 11
- Views: 7817
Re: Lost "Cells"
Sorry, I think maybe I misunderstood. Is there a function to "discover sensors"? I never needed to do anything in my older Tx or Companion 2.2, the functions were available from the start by default in both. This system was introduced in 2.2 4 years ago. You had to have been on 2.1 to nev...
- Thu Nov 04, 2021 8:00 pm
- Forum: Software
- Topic: Transferring models to RadioMaster T16s
- Replies: 4
- Views: 3973
Re: Transferring models to RadioMaster T16s
At least one of your models has broken settings with invalid sources. Don't know where those come from but you might want to fix or delete them. Companion shouldn't crash, we'll be looking into that but even if not something wrong can't be converted to anything that could be expected to be correct. ...