openrcforums

What rcgyuk said is what I did except I harvested a balance connector off an old 2s lipo and used it instead of cutthing the plug off the stock battery. Gives me a battery nd a backup.

Can someone describe exactly why it should be momentary. On my SkyNorth er9x tx I replaced the trainer switch for an on/off and it messed up instant trim, but trainer didn't seem to suffer. Kilrah gave an excellent explanation in RCG -- but I can't put my finger on it now. May it was too momentary?...

Any 2s or 3s that will fit.

But I like this better and it fits...after fudging around with the connector
http://www.hobbyking.com/hobbyking/stor ... pack_.html

Can someone describe exactly why it should be momentary. On my SkyNorth er9x tx I replaced the trainer switch for an on/off and it messed up instant trim, but trainer didn't seem to suffer.

Hmm, I can't unzip that. jZip says its a bad file. What did you use to ceate it?

Thanks Mike, I like having some measured data rather than educated analysis.

Did the total power consumption stay the same?

You didn't say how much you raised and lowered voltage, but this seems to prove its a switching regulator.

6 nimh if you want to use the charger that comes with it. For externally charging, any of the above would do, but the 3s is probably the better choice. The switching voltage regulator means very little wasted of the Volts over 6 volts needed....a 2S LiPo or LiFe could possibly drop that low...or low...

Thanks Rob...BnF micros are all I'm planning on too.

Rob
Was this a snap on antenna like this
http://www.alofthobbies.com/15cm-receiver-antenna.html
Or did you have to solder it on?

That external antenna is really awkward

In c9x you could not select a track to play as background music. in 1.35 and prior resleases.
In 1.36 you can.

And I put in a "Issue" about the Background Music selection yesterday> Same result, Absolutely Great! Thanks to all of you. I sure hope FrSky appreciates all you guys have done to make the Taranis one great TX. Forum support has also been terrific..here and RcGroups. Thanks to Rob are also...

Well that worked easy in audacity, but it took away the challenge.

I was half way through working out how to do it in a command line.
(First I had to change the background color to the 'blue screen oif death' blue, to help me dredge up Dos commands from memory.)

So I've downloaded 32bit ffmpeg and unzipped it. I get bin file with ffmpeg, ffmplay and ffprobe. clicking ffmpeg gets me a blavk screen for a fraction of second...then gone. So I'm guessing setting the Environment Variable is important. But I don't know how. Any help? Rob, does it bother anyone but...

Thanks Kilrah, I was getting more confused than usual

So I got an Environmental Variable huh?....who knew!

dang wrote: ...... For critical batteries I use thin brass bar off the same rack as the tubing. It cuts with scissors and isn't much harder to work with than braid.

Dan
....
.

Dan, sounds like a great idea. But you lost me on where you got the brass...can you expand a bit?

Romolo wrote:It's not difficult...

you should try....

seafury.jpg

seafury.zip

Fish... Feed....meal...teach...forever?
I tried on Phoenix and it came out crappy, is there some trick(s) I should know?
I was trying to do it in Infraview.

Watch out for that ten character name limit.

If I exceed it I can\'t see it on the Taranis, even if its in the file on SD

I couldn't figure how to rename it on Tx, but just do it on the PC works fine.

You gotta love this group. The developers and the advocates.
Hey ,does anyone get a response time like this from JR/Futuba/Jeti,...? I'm thinking not so much.

Thanks to Scott and Romolo, again!

I would like a good Phoenix2.
http://www.hobbyking.com/hobbyking/stor ... ouse_.html
I can't seem to find a decent complete picture of it.
Its for my FB so next time he has it at the field I'll try to take a photo.

Has anyone actually used an orange module in the Taranis? I have seen dozens of comments stating it should work and believe myself that it should. I have an orange module here that does not work. I don't know if the module is any good as I have nothing else with a JR style socket. The module blinks...

Solved!!! I wasn't deleteing the driver when I un-installed it.
Once I did that it came up correctly. And I could read the control program// er Operating System....Core, paper tape, ROM, uvERom...whatever that hard stuff is there Flash..ing around.

Happy camper

Works fine, just as you suspected//// KNEW
Thanks Mike

For better centering, more or less stick tension and change ratchet see Kilrah's post at http://openrcforums.com/forum/viewtopic.php?f=97&t=3865 An improved replacement for the delivered SOUND folder is available from Kilrah also.: http://85.18.253.250/voices/opentx-taranis/en/ Thanks Kilrah, yo...

Just tried to load an erSky.eepe in R380 of eepSkye. I get an error message of
Error Reading File
Wrong File Size - C\\.....path to file

Is this expected?

Romolo
WOW !!!!

Its on the SD card, but I'ld go with the copy to the right of the screen you are looking at near the top. It gets updated....but my SD card copy doesn't.

Step 1.5. Knowing I will be writing models now and firmwae later, the first thing I want is to read/upload the contents of the Tx as delivered by the manufacture. In hopes that if (when?) I screw something up, I'll have a baseline to return to if necessary. Almost any test will involve changing the ...

:oops: Let me say this about that. :mrgreen: At least I'm in business, can flash from my crappy, slow, obsolete desktop. Suddenly my favorite machine. :roll: I still like to get the laptop fixed. It's 3 or 4 years old and not the fastest thing, but it beats the old desktop. ......except for getting ...

It replaces. In the above screen I first uninstalled the driver, and deleted zadig, and uninstalled c9x. Just for Rob I used a different USB port and a different cable. If I click replace, it installs the driver. But it always says STM device in Dfu Mode. It takes a couple minutes to install. Will s...

Ted has it. I was trying to say the USB port and cable should be good in answer to Rob.

Now just to try to figure out how to get an image here.