Fixed it for youAs die mod kwaad is, is dit sy probleem. Ek hou van braai en goed, maar verkies nog steeds die Portegeese bier
Search found 358 matches
- Thu Jun 21, 2012 3:01 pm
- Forum: DSM2/DSMX Mods
- Topic: Spektrum logo for module case
- Replies: 22
- Views: 14156
Re: Spektrum logo for module case
- Thu Jun 21, 2012 1:45 pm
- Forum: DSM2/DSMX Mods
- Topic: Spektrum logo for module case
- Replies: 22
- Views: 14156
Re: Spektrum logo for module case
jong julle maak mos nou die mod kwaad met al die gepraat in vreemde tale.
En ja ek mis my braaivleis en castle, maar moet sê die duitse bier is aanvaarbaar.
En ja ek mis my braaivleis en castle, maar moet sê die duitse bier is aanvaarbaar.
- Thu Jun 21, 2012 1:38 pm
- Forum: companion9x
- Topic: Allow download of specific revisions?
- Replies: 18
- Views: 13940
Re: Allow download of specific revisions?
A so now I know who was building some updates .... nice ...
For the PKG I just used some free program, will check later tonight (If work load permits I will actually do a full build just to have all steps used in order)
For the PKG I just used some free program, will check later tonight (If work load permits I will actually do a full build just to have all steps used in order)
- Thu Jun 21, 2012 1:34 pm
- Forum: Electronic Mods
- Topic: i want to replace a pod so i can use and slider instead
- Replies: 3
- Views: 5137
Re: i want to replace a pod so i can use and slider instead
Finding the slider will be work for you ....you need to decide where you want it and then get something to fit in this space ...for the wiring, that is easy, take the 3 wires from the pot and place them on the slider. I can't remember what the value of the pot's are, but I think it is 5k, so get a s...
- Wed Jun 20, 2012 6:28 pm
- Forum: companion9x
- Topic: Allow download of specific revisions?
- Replies: 18
- Views: 13940
Re: Allow download of specific revisions?
so I have been away for some time ....sry life happens .... now about the dmg and pkg creation ...I have to take down the steps I use and I will post them hopefully in the next day or two ...about the instructions ....I could have missed something, but last time I followed it on a clean install all ...
- Wed Jun 20, 2012 6:10 pm
- Forum: Hardware
- Topic: Problem with extremely low range on Turnigy 9x
- Replies: 20
- Views: 16105
Re: Problem with extremely low range on Turnigy 9x
Post a picture, or if you want send it to me and I can have a look to fix it for you(free of charge, but sometimes slow). I have posted before a picture of the connections, but I'll have to search for the photo ... That said, both pads is on the edge of the board if I remember correctly ...so if you...
- Tue Jun 19, 2012 5:42 am
- Forum: The Pickled Gnu (The Pub)
- Topic: Please list some location in profile.
- Replies: 3
- Views: 3341
- Mon Jun 18, 2012 12:40 pm
- Forum: The FRSKY Forum
- Topic: IMPORTANT: Timing issue on CPPM output of FrSky recievers
- Replies: 8
- Views: 17377
Re: IMPORTANT: Timing issue on CPPM output of FrSky reciever
So I have been "missing in action" for some time ....life happens ...but now I am almost back so here goes: I have tested before with 8ch and limiting the channels to 74% and in this case 8 channels can fit in the 6ch space, with no extended limits. This is my current work around for the p...
- Wed May 23, 2012 12:08 am
- Forum: Where to buy / Spares / Modules? Selling up?
- Topic: Leader Hobby module for Turnigy 9X?
- Replies: 10
- Views: 8859
Re: Leader Hobby module for Turnigy 9X?
From the looks of it yes, but only way for sure is to try it. looks like the right one any way, and for $16 you can't really go wrong. if it does not work then you can always sell it on ebay
- Tue May 22, 2012 9:06 pm
- Forum: Other Electronic Projects
- Topic: Robot Build - Tachikoma from Ghost in the Shell
- Replies: 7
- Views: 9811
Re: Robot Build - Tachikoma from Ghost in the Shell
Now that is a very nice idea and place !!!
- Mon May 21, 2012 10:39 pm
- Forum: companion9x
- Topic: Allow download of specific revisions?
- Replies: 18
- Views: 13940
Re: Allow download of specific revisions?
my solution to this is simple, when ever I get a new rev of firmware I save it with the rev number in the end. It will be nice thou to be able to download a older rev, but for me I have all the ones I have used before. And mac build is not far behind, I just don't always have time to build it and up...
- Sat May 19, 2012 5:14 pm
- Forum: General RC Electronic Projects and Discussion
- Topic: newbie for Qaud/multirotor guidance
- Replies: 14
- Views: 10507
Re: newbie for Qaud/multirotor guidance
sorry I missed some days on here. The frame you got is know for generating and amplifying vibration, as it was pointed out on the video I posted in the Pipo thread. It works fine with some controllers, and with others it mess every thing up. I am not shooting your frame down, and it may work perfect...
- Thu May 17, 2012 7:57 am
- Forum: General RC Electronic Projects and Discussion
- Topic: PIPO32 - Monster ISU :)
- Replies: 94
- Views: 60140
Re: PIPO32 - Monster ISU :)
bad choice on frame ....those plastic frames have terrible vibrations ....see here for example .....let me find the vid ....herekaos wrote:Erazz:
just to let you know your pipo baby will be well taken care of, look at the new home waiting for it
http://youtu.be/N8hHBkRd6Gk
- Thu May 17, 2012 7:27 am
- Forum: Where to buy / Spares / Modules? Selling up?
- Topic: FS-TH9X Main Board Needed
- Replies: 20
- Views: 16593
Re: FS-TH9X Main Board Needed
back on topic, I have fixed worse damaged board than that, by looking at the out of focus pic you posted, but a hires pic showing the damage can help to make a more accurate estimate if it is fixable. You are on the wrong side of the pond for me to offer help ( and my help is somewhat slow, ask some...
- Thu May 17, 2012 6:23 am
- Forum: The Pickled Gnu (The Pub)
- Topic: My new flying buddy!
- Replies: 30
- Views: 16048
Re: My new flying buddy!
Congrats, but you should not wait 6-7 years .... 3 should do ...start early
- Thu May 17, 2012 6:08 am
- Forum: Retro Radios
- Topic: Wanted Kraft schematics
- Replies: 64
- Views: 68158
- Sat May 05, 2012 1:04 pm
- Forum: General RC Electronic Projects and Discussion
- Topic: PIPO32 - Monster ISU :)
- Replies: 94
- Views: 60140
Re: PIPO32 - Monster ISU :)
Just remember initial setup and testing should be done without props .....
- Fri May 04, 2012 6:07 am
- Forum: Hardware
- Topic: Temperature Drift / 9X, er9x, Turnigy TX Module, several RXs
- Replies: 26
- Views: 14791
Temperature Drift / 9X, er9x, Turnigy TX Module, several RXs
I have two modules here, will test them, if one does not drift you can have it, but you should look at frsky like said above, the are great (and if you get the right ones you have telemetry as well)
Groot
Send from my iPhone using Tapatalk
Groot
Send from my iPhone using Tapatalk
- Thu Apr 26, 2012 5:52 am
- Forum: The Pickled Gnu (The Pub)
- Topic: trouble with stock 9x
- Replies: 21
- Views: 11906
Re: trouble with stock 9x
are you flashing from command line, or using eepe ? If using command line try eepe. The SCK error is known and should not be the cause of the problem.
- Tue Apr 24, 2012 11:34 am
- Forum: openTx
- Topic: Frsky telemetry data
- Replies: 34
- Views: 19837
Re: Frsky telemetry data
please post some details on how what where ...maybe I can finally use them ardunio's for something useful
- Tue Apr 24, 2012 11:26 am
- Forum: PROGRAMMERS
- Topic: Help flashing
- Replies: 18
- Views: 13705
Re: Help flashing
yes to avoid spam and bots we need to get all new users thru the 1st few posts. by now you should be able to pm I think. If not make a few more posts ...and you should be able to pm. If not just ask and some one can pm Westy on your behalf
- Tue Apr 24, 2012 11:07 am
- Forum: gruvin9x
- Topic: Gruvin Board
- Replies: 12
- Views: 19434
Re: Gruvin Board
you know I will gladly solder all together for you !!
- Mon Apr 23, 2012 10:06 am
- Forum: PROGRAMMERS
- Topic: Help flashing
- Replies: 18
- Views: 13705
Re: Help flashing
Hi Mike,
This is where you will find some one close to help. If you were in Germany or EU I would have done it for you
This is where you will find some one close to help. If you were in Germany or EU I would have done it for you
- Mon Apr 23, 2012 6:35 am
- Forum: The Pickled Gnu (The Pub)
- Topic: Simple programming problem - Stock 9x
- Replies: 4
- Views: 4426
Re: Simple programming problem - Stock 9x
You will NOT like my answer, but I will give it any way. Get a programer and flash a custom firmware. There is not many people on this forum with stock firmware, and this forum is intended for Custom firmwares and mod's. If you don't want to do the mod yourself for a programer look at the SmartiePar...
- Mon Apr 23, 2012 6:21 am
- Forum: Turnigy 9XR radio
- Topic: Turnigy 9XR General
- Replies: 471
- Views: 248611
Re: Turnigy 9XR
Well what I know, the original RF unit is apparently a fake of the above mentioned ...but the good news is FrSky is not stopped and they have no problem with them. The problem is you can not order the 9x without RF module ...and if the stop one piece the take the complete shipment. And just before s...
- Sat Apr 21, 2012 7:40 am
- Forum: Reviews
- Topic: Stereo microscope for electronics
- Replies: 90
- Views: 117040
Re: Stereo microscope for electronics
I see your are already with LED lights ...Got mine from German supplier, and added a bridge rectifier to run my LED's lights, works great and better than the standard lights that was in before. For "hobby" work it is perfect.
- Thu Apr 19, 2012 12:21 pm
- Forum: Reviews
- Topic: Stereo microscope for electronics
- Replies: 90
- Views: 117040
Re: Stereo microscope for electronics
I replaced the standard light with a LED one similar to this
The inter 12v is not nicely rectified and you have some flickering, but this can be solved easy. Currently I use a external light source and it works perfect for my needs.
The inter 12v is not nicely rectified and you have some flickering, but this can be solved easy. Currently I use a external light source and it works perfect for my needs.
- Mon Apr 16, 2012 8:36 am
- Forum: Electronic Mods
- Topic: T9X mod to use Flysky module, Frysky module and DSMX module
- Replies: 207
- Views: 193305
Re: T9X mod to use both Flysky module and Frysky module
for the cap I can help, yes it is polarized, you can see from the marking.
- Mon Apr 16, 2012 4:47 am
- Forum: Reviews
- Topic: Stereo microscope for electronics
- Replies: 90
- Views: 117040
Re: Stereo microscope for electronics
well I have a usb Microscope if you want to try it ....it does not work on my mac so is just standing gathering dust. It was a cheap one and can give a indication to you if it could help. I also wear glasses, but take them of for the Microscope. I can still see fairly ok without them so am not compl...
- Mon Apr 16, 2012 12:47 am
- Forum: Reviews
- Topic: Stereo microscope for electronics
- Replies: 90
- Views: 117040
Re: Stereo microscope for electronics
I have one like that, and it works fine for me ...did not get all the extras in your picture, but again for what I use it for it works a treat. I use My magnifying lamp as light source, but will defiantly be getting some kind of LED ring like you have linked above. The only problem I have with the s...