openrcforums

As die mod kwaad is, is dit sy probleem. Ek hou van braai en goed, maar verkies nog steeds die Portegeese bier

Fixed it for you

jong julle maak mos nou die mod kwaad met al die gepraat in vreemde tale.
En ja ek mis my braaivleis en castle, maar moet sê die duitse bier is aanvaarbaar.

A so now I know who was building some updates .... nice ...
For the PKG I just used some free program, will check later tonight (If work load permits I will actually do a full build just to have all steps used in order)

Finding the slider will be work for you ....you need to decide where you want it and then get something to fit in this space ...for the wiring, that is easy, take the 3 wires from the pot and place them on the slider. I can't remember what the value of the pot's are, but I think it is 5k, so get a s...

so I have been away for some time ....sry life happens .... now about the dmg and pkg creation ...I have to take down the steps I use and I will post them hopefully in the next day or two ...about the instructions ....I could have missed something, but last time I followed it on a clean install all ...

Post a picture, or if you want send it to me and I can have a look to fix it for you(free of charge, but sometimes slow). I have posted before a picture of the connections, but I'll have to search for the photo ... That said, both pads is on the edge of the board if I remember correctly ...so if you...

+1

So I have been "missing in action" for some time ....life happens ...but now I am almost back so here goes: I have tested before with 8ch and limiting the channels to 74% and in this case 8 channels can fit in the 6ch space, with no extended limits. This is my current work around for the p...

From the looks of it yes, but only way for sure is to try it. looks like the right one any way, and for $16 you can't really go wrong. if it does not work then you can always sell it on ebay

Now that is a very nice idea and place !!!

my solution to this is simple, when ever I get a new rev of firmware I save it with the rev number in the end. It will be nice thou to be able to download a older rev, but for me I have all the ones I have used before. And mac build is not far behind, I just don't always have time to build it and up...

sorry I missed some days on here. The frame you got is know for generating and amplifying vibration, as it was pointed out on the video I posted in the Pipo thread. It works fine with some controllers, and with others it mess every thing up. I am not shooting your frame down, and it may work perfect...

kaos wrote:Erazz:
just to let you know your pipo baby will be well taken care of, look at the new home waiting for it

bad choice on frame ....those plastic frames have terrible vibrations ....see here for example .....let me find the vid ....here
http://youtu.be/N8hHBkRd6Gk

back on topic, I have fixed worse damaged board than that, by looking at the out of focus pic you posted, but a hires pic showing the damage can help to make a more accurate estimate if it is fixable. You are on the wrong side of the pond for me to offer help ( and my help is somewhat slow, ask some...

Congrats, but you should not wait 6-7 years .... 3 should do ...start early

Not sure but may have a look here and here .... Not sure this is what you need/want but at least a starting point

Also some info on them here (some pictures of older schematics)

Just remember initial setup and testing should be done without props .....

I have two modules here, will test them, if one does not drift you can have it, but you should look at frsky like said above, the are great (and if you get the right ones you have telemetry as well)


Groot

Send from my iPhone using Tapatalk

are you flashing from command line, or using eepe ? If using command line try eepe. The SCK error is known and should not be the cause of the problem.

please post some details on how what where ...maybe I can finally use them ardunio's for something useful

yes to avoid spam and bots we need to get all new users thru the 1st few posts. by now you should be able to pm I think. If not make a few more posts ...and you should be able to pm. If not just ask and some one can pm Westy on your behalf

you know I will gladly solder all together for you !!

Hi Mike,

This is where you will find some one close to help. If you were in Germany or EU I would have done it for you

You will NOT like my answer, but I will give it any way. Get a programer and flash a custom firmware. There is not many people on this forum with stock firmware, and this forum is intended for Custom firmwares and mod's. If you don't want to do the mod yourself for a programer look at the SmartiePar...

Well what I know, the original RF unit is apparently a fake of the above mentioned ...but the good news is FrSky is not stopped and they have no problem with them. The problem is you can not order the 9x without RF module ...and if the stop one piece the take the complete shipment. And just before s...

I see your are already with LED lights ...Got mine from German supplier, and added a bridge rectifier to run my LED's lights, works great and better than the standard lights that was in before. For "hobby" work it is perfect.

I replaced the standard light with a LED one similar to this
The inter 12v is not nicely rectified and you have some flickering, but this can be solved easy. Currently I use a external light source and it works perfect for my needs.

for the cap I can help, yes it is polarized, you can see from the marking.

well I have a usb Microscope if you want to try it ....it does not work on my mac so is just standing gathering dust. It was a cheap one and can give a indication to you if it could help. I also wear glasses, but take them of for the Microscope. I can still see fairly ok without them so am not compl...

I have one like that, and it works fine for me ...did not get all the extras in your picture, but again for what I use it for it works a treat. I use My magnifying lamp as light source, but will defiantly be getting some kind of LED ring like you have linked above. The only problem I have with the s...